Part Description: 2007 GMC Sierra 3500 Classic Manifold ABSolute Pressure Sensor
More Info
Vehicle Fitment
2007 GMC Sierra 3500 Classic | SL | 8 Cyl 6.0L
2007 GMC Sierra 3500 Classic | SLE | 8 Cyl 6.0L
2007 GMC Sierra 3500 Classic | SLT | 8 Cyl 6.0L
2007 GMC Sierra 3500 Classic | WT | 8 Cyl 6.0L
2007 GMC Sierra 3500 Classic | SL | 8 Cyl 8.1L
2007 GMC Sierra 3500 Classic | SLE | 8 Cyl 8.1L
2007 GMC Sierra 3500 Classic | SLT | 8 Cyl 8.1L
2007 GMC Sierra 3500 Classic | WT | 8 Cyl 8.1L
Show More
FAQ for MAP Sensor Repair
Q: What is the removal procedure for the manifold absolute pressure sensor?
A:
The procedure is to remove the intake manifold sight shield, disconnect the engine wiring harness electrical connector from the manifold absolute pressure (MAP) sensor, and remove the MAP sensor retainer.
By Bob
GM Specialist
01/11/2022
Q: What is the installation procedure for the manifold absolute pressure sensor?
A:
The proper way is to install the MAP sensor, connect the engine harness wiring electrical connector to the MAP sensor, and install the intake manifold sight shield.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to clean the throttle body?
A:
The proper way is to remove the air cleaner outlet duct, inspect the Throttle Body bore and the throttle plate for deposits, clean the throttle body bore and the throttle plate, and install the air cleaner outlet duct.
Q: How to remove the air cleaner element?
A:
The proper way is to disconnect the engine wiring harness electrical connector from the mass airflow (MAF)/intake air temperature (IAT) sensor, loosen the air cleaner housing screws, lift the air cleaner housing cover, and remove the Air Filter element.
Q: What is the installation procedure for the engine block valley cover?
A:
The procedure is to install a new washer, the oil pressure sensor, the O-ring seals to the cover, the engine valley cover, and the Intake Manifold.