Notes: Some competitive parts have a detachable ring that can remain in the air filter housing. Make sure this detachable ring is removed from the housing before installing the new part
Class: HA
Cubic Feet Per Minute Rating: 792 CFM
Duty Type: HD
Filter End Material: Plastic
Height: 6.275"
Inner Diameter Top: Closed
Inside Diameter Top: Closed
Media Type: Cellulose
Outer Diameter: 8.917"
Outer Diameter Bottom: 8.917"
Outer Diameter Top: 8.917"
UPC: 765809491847
Part Description: 2007 GMC Sierra 3500 Classic Corrugated Style Air Filter
More Info
Vehicle Fitment
2007 GMC Sierra 3500 Classic | All Trims | 8 Cyl 6.6L
Part Description: 2007 GMC Sierra 3500 Classic Panel Air Filter
More Info
Vehicle Fitment
2007 GMC Sierra 3500 Classic | All Trims | 8 Cyl 6.0L
2007 GMC Sierra 3500 Classic | All Trims | 8 Cyl 8.1L
FAQ for Air Filter Repair
Q: How to remove the air cleaner element?
A:
The proper way is to disconnect the engine wiring harness electrical connector from the mass airflow (MAF)/intake air temperature (IAT) sensor, loosen the air cleaner housing screws, lift the air cleaner housing cover, and remove the air filter element.
By Bob
GM Specialist
01/11/2022
Q: How to install the air cleaner element?
A:
The proper way is to install the new air filter element and the air cleaner housing cover and connect the engine harness electrical connector to the MAF/IAT sensor.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to clean the throttle body?
A:
The proper way is to remove the air cleaner outlet duct, inspect the Throttle Body bore and the throttle plate for deposits, clean the throttle body bore and the throttle plate, and install the air cleaner outlet duct.
Q: What is the removal procedure for the manifold absolute pressure sensor?
A:
The procedure is to remove the intake manifold sight shield, disconnect the engine wiring harness electrical connector from the manifold absolute pressure (MAP) sensor, and remove the MAP Sensor retainer.
Q: What is the removal procedure for the engine block valley cover?
A:
The procedure is to remove the Intake Manifold, the engine valley cover and gasket, the O-ring seals from the cover, and the oil pressure sensor and washer.