2007 Chevrolet Impala | 50th Anniversary Edition, Eco, LS, LT, LTZ, Police, SS | 4 Cyl 2.4 L ELECTRIC/GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Notes: Grade: Aftermarket; Description: Seal included; Thread Size: M12 X 1,5; Plug (Connector): 2 Pins
Colour: Black
Height [mm]: 19
Length [mm]: 19
Number of Poles: 2
Packaging Depth [cm]: 3
Packaging height [cm]: 3,3
Packaging width [cm]: 5,8
Spanner Size: 19
Supplementary Article/Supplementary Info: with seal
Thread Size: M12x1,5
Weight [kg]: 0,02962
Width [mm]: 59
Part Description: 2007 Chevrolet Impala Engine Coolant Temperature Sensor
More Info
Vehicle Fitment
2007 Chevrolet Impala | All Trims | 8 Cyl 5.3L
2007 Chevrolet Impala | All Trims | 6 Cyl 3.5L
2007 Chevrolet Impala | All Trims | 6 Cyl 3.9L
Show More
FAQ for Coolant Temperature Sensors Repair
Q: How do you install the engine coolant temperature sensor?
A:
You can install the following: the ECT sensor, the intake manifold cover, and the exhaust crossover.
By Omar
GM Specialist
08/04/2022
Q: What is the recommended torque when installing the ECT sensor?
A:
You can tighten the ECT sensor to 20 N.m (15 lb-ft).
By Omar
GM Specialist
03/04/2022
Q: What is the removal procedure for the engine coolant temperature sensor?
A:
The procedure is to drain the cooling system, remove the intake manifold cover and the exhaust crossover, disconnect the ECT sensor electrical connector and remove the ECT sensor.
By Bob
GM Specialist
01/04/2022
FAQ for Other Repair Info
Q: How do you install the coolant recovery reservoir?
A:
You can install the following: the coolant recovery reservoir, the coolant recovery reservoir nuts, the Coolant Reservoir hose, and the reservoir hose and clamp.
Q: How do you install the cooling fan motor?
A:
You can install the following: the engine Cooling Fan Motor, the cooling fan motor bolts, the cooling fan motor nuts, the new engine cooling fan blade, and the fan shroud assembly.
Q: How do you install the thermostat?
A:
You can install the following: a new Thermostat, the thermostat housing bolt/stud, the radiator outlet hose, and the air cleaner outlet duct.