Notes: Impala, Monte Carlo; 3.5l, 3.9l; 3.5 & 3.9 Liter
Item Dimensions: 17.9 x 13.2 x 9.2 inches
Item Weight: 1.30 Pounds
Replaces: 15820109
Part Description: 2007 Chevrolet Impala Reservoir Asm-Coolant Recovery
More Info
Vehicle Fitment
2007 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
FAQ for Coolant Reservoir Repair
Q: How do you install the coolant recovery reservoir?
A:
You can install the following: the coolant recovery reservoir, the coolant recovery reservoir nuts, the coolant reservoir hose, and the reservoir hose and clamp.
By Bob
GM Specialist
08/04/2022
Q: What is the recommended nut torque when installing the coolant recovery reservoir nuts?
A:
You can tighten the nuts to 3.3 N.m (29 lb in).
By Omar
GM Specialist
04/04/2022
Q: What is the removal procedure for the coolant recovery reservoir?
A:
The procedure is to remove the following: the reservoir hose, the coolant recovery reservoir nuts, and the coolant recovery reservoir.
By Bob
GM Specialist
01/04/2022
Q: What may leak detection dye P/N 12378563 (J 29545-6) (in Canada P/N 88900915) cause?
A:
Leak detection dye P/N 12378563 (J 29545-6) (in Canada P/N 88900915) may cause DEX-COOL(R) coolant to appear green in a black vessel making it appear to be conventional (green) coolant.
By Bob
GM Specialist
30/03/2022
FAQ for Other Repair Info
Q: How do you install the cooling fan motor?
A:
You can install the following: the engine Cooling Fan Motor, the cooling fan motor bolts, the cooling fan motor nuts, the new engine cooling fan blade, and the fan shroud assembly.
Q: How do you install the thermostat?
A:
You can install the following: a new Thermostat, the thermostat housing bolt/stud, the radiator outlet hose, and the air cleaner outlet duct.
Q: How do you install the water pump?
A:
First position a new Water Pump gasket and the water pump to the engine front cover, install the water pump bolts, install the water pump pulley and bolts and install the drive belt. Next, tighten the water pump pulley bolts, fill the cooling system and inspect for leaks.