2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
Part Description: 2007 Chevrolet Colorado A/C Receiver Drier
More Info
Vehicle Fitment
2007 Chevrolet Colorado | All Trims | 4 Cyl 2.9L
2007 Chevrolet Colorado | All Trims | 5 Cyl 3.7L
FAQ for A/C Receiver Drier Repair
Q: What kind of special tools will be required when serving the Receiver Dehydrator?
A:
The tools required include J39400-A Halogen Leak Detector.
By Bob
GM Specialist
28/10/2022
Q: What is the recommended torque for the evaporator tube bolt attaching to the receiver dehydrator?
A:
The recommended torque is 20 N.m (15 lb-ft).
By Bob
GM Specialist
28/10/2022
Q: What is the recommended torque for the condenser hose bolt securing onto the receiver dehydrator?
A:
The recommended torque is 20 N.m (15 lb-ft).
By Bob
GM Specialist
28/10/2022
FAQ for Other Repair Info
Q: What is the proper way to install the Ambient Air Temperature Sensor?
A:
You should position the sensor to the radiator support bracket, install the sensor, connect the electrical connector to the ambient Air Temperature Sensor, and install the air inlet grille.
Q: How to remove the Blower Motor?
A:
You need to remove the right hinge pillar trim panel, remove the Blower Motor mounting screws, remove the blower motor cooling tube, then disconnect the blower motor electrical connector, and remove the blower motor.
Q: How to remove the Blower Motor Resistor Assembly?
A:
You need to disconnect the Blower Motor Resistor electrical connector, remove the blower motor resistor mounting screws, then remove the blower motor resistor.