Part Description: 2007 Cadillac STS Cable Asm-Parking Brake Rear
More Info
Vehicle Fitment
2007 Cadillac STS | Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
FAQ for Parking Brake Cable Repair
Q: What kind of special tools will be used when removing the Park Brake Cable Mounting Bracket?
A:
J37043 Parking Brake Cable Release Tool.
By Bob
GM Specialist
02/11/2022
Q: How can you ensure whether the park brake cable retainers are seated or not?
A:
You can cycle the park brake pedal 1 to 2 times to verify it.
By Bob
GM Specialist
02/11/2022
Q: What is the recommended torque for the park brake cable bracket mounting bolts?
A:
The recommended torque is 60 N.m (44 lb-ft).
By Bob
GM Specialist
02/11/2022
Q: What kind of special tools will be used when removing the Parking Brake Intermediate Cable?
A:
J37043 Parking Brake Cable Release Tool.
By Bob
GM Specialist
02/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the Steering Column Lock Control Module?
A:
Remove the knee bolster, disconnect the electrical connectors, loosen the retaining screw on the Steering Column control module, and slide the control module out of the retaining bracket.
Q: What should be removed from the steering shaft?
A:
The boot seal, the Steering Shaft seal, the sensor retainer, and the sensor locator.
Q: What should you make sure of when reinstalling the old vacuum brake booster?
A:
You need to ensure that the locking tab on the Brake Booster assembly is straight.