Part Description: 2007 Cadillac STS Column Assembly
More Info
Vehicle Fitment
2007 Cadillac STS | Base, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
FAQ for Steering Column Repair
Q: What is the removal procedure for the Steering Column Lock Control Module?
A:
Remove the knee bolster, disconnect the electrical connectors, loosen the retaining screw on the steering column control module, and slide the control module out of the retaining bracket.
By Bob
GM Specialist
02/11/2022
Q: How do you install the Steering Column Lock Control Module?
A:
You need to install the control module to the steering column, connect the electrical connectors, install the knee bolster, and program the steering column control module.
By Bob
GM Specialist
02/11/2022
Q: What should you do when the capsules are not securely seated and the bracket is welded to the jacket assembly?
A:
You need to replace the jacket assembly only.
By Bob
GM Specialist
01/11/2022
Q: What should be considered when checking the steering shaft runout?
A:
The runout must not exceed 1.60 mm (0.0625 in).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be removed from the steering shaft?
A:
The boot seal, the Steering Shaft seal, the sensor retainer, and the sensor locator.
Q: What do you need to remove from the steering shaft?
A:
You need to remove the boot seal, the steering shaft seal, the sensor retainer, and the sensor locator.