Part Description: 2007 Cadillac DTS Premium™ Front Outer Steering Tie Rod End
Vehicle Fitment
2007 Cadillac DTS | All Trims | All Engines
FAQ for Tie Rod End Repair
Q: What should be done if the rack and pinion boot (3) is not shaped properly?
A:
You should adjust the rack and pinion boot by hand before installing the boot clamp.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to install the rack and pinion boot?
A:
The proper way is to install the rack and pinion boot, the new rack and pinion boot clamp, the tie rod end clamp, the outer tie rod, and the tire and wheel.
By Bob
GM Specialist
01/11/2022
Q: What should be done if a breather tube is present?
A:
If a breather tube is present, mark the location of the breather tube on the gear assembly before the removal of the rack and pinion boot.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the rack and pinion boot?
A:
The procedure is to remove the tire and wheel, the outer tie rod, the hex jam nut, the tie rod end clamp, and the rack and pinion boot.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the proper way to install the Intermediate Steering Shaft?
A:
The proper way is to install the intermediate Steering Shaft, the intermediate steering shaft bolt and nut, the intermediate steering shaft boot, and the steering column.
Q: What should be noticed about the Hydraulic brake systems?
A:
Hydraulic brake systems use two distinct and incompatible fluids. Power steering fluid is used in the hydraulic Brake Booster system. Brake fluid is used in the master cylinder and brake pipes. Use extreme care when selecting brake system fluids, or seal damage can result. Refer to General Information to select the correct fluid.
Q: What is the removal procedure for the Rear Brake Hose?
A:
The procedure is to remove the tire and wheel assembly, the brake pipe fitting, the Brake Hose, the brake hose bolt, the brake hose, and the two copper brake hose gaskets.