Part Description: 2007 Cadillac DTS HOSE ASM, RR BRK
More Info
Vehicle Fitment
2007 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
FAQ for Brake Hose Repair
Q: What should be noticed when installing the pipe?
A:
When installing the pipe, you should maintain a clearance of 19 mm (3/4 in) from all moving or vibrating components.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the Rear Brake Hose?
A:
The procedure is to remove the tire and wheel assembly, the brake pipe fitting, the brake hose, the brake hose bolt, the brake hose, and the two copper brake hose gaskets.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to install the Rear Brake Hose?
A:
The proper way is to install the brake hose bolt, the brake hose, the brake hose retainer, the brake pipe fitting, and the tire and wheel assembly.
By Bob
GM Specialist
01/11/2022
Q: What should be used when replacing brake pipes?
A:
You should use double-walled steel brake pipe when replacing brake pipes.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the proper way to install the Intermediate Steering Shaft?
A:
The proper way is to install the intermediate Steering Shaft, the intermediate steering shaft bolt and nut, the intermediate steering shaft boot, and the steering column.
Q: What should be noticed about the Hydraulic brake systems?
A:
Hydraulic brake systems use two distinct and incompatible fluids. Power steering fluid is used in the hydraulic Brake Booster system. Brake fluid is used in the master cylinder and brake pipes. Use extreme care when selecting brake system fluids, or seal damage can result. Refer to General Information to select the correct fluid.
Q: What should be noticed when adding fluid to the brake master cylinder reservoir?
A:
When adding fluid to the Brake Master Cylinder reservoir, you should use only Delco Supreme 11(R), GM P/N 12377967 (Canadian P/N 992667), or equivalent DOT 3 brake fluid from a clean, sealed brake fluid container.