< Back ×
My Vehicle Change Vehicle
2007 Cadillac DTS
< Back to View All
Steering Racks & Gearboxes
- Department
- Prices
OEM (Genuine) 2007 Cadillac DTS Gear Asm, Steering (Remanufacture) <See Guide/Contact Bfo>
PartNumber: 19330570
Product Specifications- Notes: W/O Sport Suspension; Dts; Soft Ride Suspension
- Other Names: Gear Assembly, Steering Gear
- Item Dimensions: 50.3 x 11.0 x 6.0 inches
- Item Weight: 19.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19169238, 19208458
- Part Description: 2007 Cadillac DTS Gear Asm, Steering (Remanufacture) <See Guide/Contact Bfo>
Vehicle Fitment- 2007 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
OEM (Genuine) 2007 Cadillac DTS Gear Asm, Steering <See Guide/Contact Bfo>
PartNumber: 19330571
Product Specifications- Notes: W/Sport Suspension; Dts; Sport Suspension
- Other Names: Gear Assembly, Steering Gear
- Item Dimensions: 51.0 x 11.2 x 6.1 inches
- Item Weight: 23.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19169237, 19208459, 15221009
- Part Description: 2007 Cadillac DTS Gear Asm, Steering <See Guide/Contact Bfo>
Vehicle Fitment- 2007 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
FAQ for Steering Gearbox Repair
Q: What is the assembly Procedure for the Steering Gear Cylinder Pipe Assemblies/O-Ring Seals?
A:
The procedure is to inspect the cylinder lines, replace the parts as needed, install the new O-ring seals, and then install the cylinder line assemblies.
By Bob
GM Specialist
01/11/2022Q: What is the procedure for rack and pinion gear rack bearing preload adjustment?
A:
The procedure is to loosen the adjuster plug lock nut, turn the adjuster plug clockwise, and then install the adjuster plug lock nut to the adjuster plug.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the power steering gear heat shield?
A:
The proper way is to install the power steering gear heat shield, the electrical harness clip, and the stabilizer shaft links, and then lower the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the disassembly Procedure for the Steering Gear Cylinder Pipe Assemblies/O-Ring Seals?
A:
The procedure is to loosen both cylinder line fittings, remove both cylinder line assemblies, and then remove and discard the O-ring seals.
By Bob
GM Specialist
01/11/2022Q: What should be done before partially lowering?
A:
You should make the frame properly supported because the frame should not be lowered any further than needed to gain access to the steering gear.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the power steering gear heat shield?
A:
The procedure is to raise and support the vehicle and remove the stabilizer shaft links, the electrical harness clip, and the power steering gear heat shield.
By Bob
GM Specialist
01/11/2022Q: What should be noticed before moving the inner tie rod from the steering gear?
A:
You should not change the steering gear preload adjustment before moving the inner tie rod from the steering gear.
By Bob
GM Specialist
01/11/2022Q: What should be done before disconnecting the steering column or intermediate shaft from the steering gear?
A:
You should make the wheels of the vehicle straight ahead and the steering column in the LOCK position.
By Bob
GM Specialist
01/11/2022Q: What should be noticed before LOCTITE(R) application?
A:
You should clean the threads and check LOCTITE(R) or equivalent containers for an expiration date before LOCTITE(R) application.
By Bob
GM Specialist
01/11/2022See more FAQs (4)