2007 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
FAQ for Coil Springs Repair
Q: What is the proper way to install the Coil Spring (FE7)?
A:
The proper way is to install the coil spring, the adjustment link, the tires, and the wheels, and then check the toe and adjust.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to install the Coil Spring?
A:
The proper way is to install the coil spring, the adjustment link, the adjustment link retaining nut, and the tire and wheel.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the Coil Spring?
A:
The procedure is to remove the tire and the wheel, the automatic level control link, the shock absorber lower retaining bolts, the adjustment link retaining nut, and the coil spring.
By Bob
GM Specialist
01/11/2022
Q: What should be noticed when handling the suspension coil spring?
A:
Care should be taken to avoid chipping or scratching the coating when handling the suspension coil spring. Damage to the coating can cause premature failure.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the Coil Spring (FE7)?
A:
The procedure is to remove the tires and the wheels, the electronic level control air tube, the 2 bolts, the hex nut, and the coil spring.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the proper way to install the Intermediate Steering Shaft?
A:
The proper way is to install the intermediate Steering Shaft, the intermediate steering shaft bolt and nut, the intermediate steering shaft boot, and the steering column.
Q: What should be noticed about the Hydraulic brake systems?
A:
Hydraulic brake systems use two distinct and incompatible fluids. Power steering fluid is used in the hydraulic Brake Booster system. Brake fluid is used in the master cylinder and brake pipes. Use extreme care when selecting brake system fluids, or seal damage can result. Refer to General Information to select the correct fluid.
Q: What is the removal procedure for the Rear Brake Hose?
A:
The procedure is to remove the tire and wheel assembly, the brake pipe fitting, the Brake Hose, the brake hose bolt, the brake hose, and the two copper brake hose gaskets.