Part Description: 2007 Cadillac CTS Arm, Windshield Wiper
More Info
Vehicle Fitment
2007 Cadillac CTS | Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
FAQ for Windshield Wiper Arms Repair
Q: What should be noticed while removing the Wiper Arm (LHD)?
A:
You should use the J 39637 to remove the wiper arm if the wiper arm fails to loosen from the wiper arm drive spindle.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to install the Wiper Arm (RHD)?
A:
The way is to install the wiper blade, the wiper arm, the hood assist rods, and the wiper nut covers.
By Bob
GM Specialist
01/11/2022
Q: What should be noticed while installing the Wiper Arm (LHD)?
A:
You should hold the wiper arm into position while tightening the nut.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the Wiper Arm (RHD)?
A:
The procedure is to remove the covers, the wiper arm nuts, the upper hood assist rods, the wiper arm, and the wiper blade.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the proper way to install the Washer Pump Filter Grommet?
A:
The way is to install the Washer Pump, connect the electrical connector and the washer hose, and install the lower air deflector.
Q: What is the removal procedure for the Wiper Blade Element (Passenger Side 566mm)?
A:
The procedure is to remove the Wiper Blade and the bottom claws of the wiper blade and pull the wiper blade element out through the wiper blade claws.
Q: What is the removal procedure for the Washer Solvent Container Level Sensor?
A:
Remove the lower air deflector, drain the washer solvent, and remove the washer solvent level sensor switch and the washer solvent container level sensor grommet.