FAQ for Wiper Blade Repair
Q: What is the removal procedure for the Wiper Blade Element (Passenger Side 566mm)?
A:
The procedure is to remove the wiper blade and the bottom claws of the wiper blade and pull the wiper blade element out through the wiper blade claws.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the Wiper Arm Blade (LHD)?
A:
The procedure is to cycle the wiper blades to the mid-wipe position on the glass, push the button of the wiper blade clip, and remove the wiper blade and the wiper arm.
By BobGM Specialist
01/11/2022 Q: What is the proper way to install the Wiper Blade Element (Passenger Side 566mm)?
A:
The way is to guide the wiper blade element through the wiper blade claw sets, engage the bottom claw of the wiper blade into the notches, and install the wiper blade onto the wiper arm.
By BobGM Specialist
01/11/2022 Q: What should be noticed before removing the Wiper Blade Element (Driver Side 530mm)?
A:
You should replace the wiper blade element if it is removed from the wiper blade.
By BobGM Specialist
01/11/2022 Q: What is the proper way to install the Wiper Arm Blade (LHD)?
A:
The way is to insert the hook of the wiper arm through the opening in the wiper blade, pull the wiper blade pivot into the wiper arm hook until the pivot locks into the hook, and ensure the blade is locked onto the wiper arm.
By BobGM Specialist
01/11/2022 Q: What should be noticed before installing the Wiper Blade Element (Driver Side 530mm)?
A:
You should keep the wiper blade claws in the rubber claw channel of the wiper blade element. Do not allow the claws of the wiper blade to contact the metal spline of the wiper blade element.
By BobGM Specialist
01/11/2022 Q: How to clean the Blade Element?
A:
Lift each blade assembly off of the windshield, clean the element with a cloth saturated, hold the blade in one hand, wipe the element with the saturated cloth until the black residue disappears, and rinse the blade assembly elements with clean drinkable water.
By BobGM Specialist
01/11/2022 Q: What should be noted when servicing the Wiper Arm Blade (RHD)?
A:
The wiper blades need to be cycled to the mid-wipe position to prevent the wiper arms from contacting the rear edge of the hood.
By BobGM Specialist
01/11/2022 See more FAQs (3)