FAQ for Automatic Transmission Oil Cooler Repair
Q: What is the installation procedure for the Cooler Fitting to Cooler?
A:
Install the TOC fitting to the radiator. Connect the TOC line to the TOC fitting. Snap the plastic cap onto the TOC fitting. Ensure that the plastic cap is fully seated against the fitting. Ensure that no gap is present between the cap and the fitting. Inspect the fluid level and add fluid if necessary.
By BobGM Specialist
01/11/2022 Q: What should be done before servicing the Cooler Fitting to Cooler?
A:
Raise and support the vehicle.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the TOC fitting?
A:
The recommended torque is 18 N.m (13 lb-ft).
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the Cooler Fitting to Cooler?
A:
Disengage the plastic cap from the TOC fitting. Pull the plastic cap back along the pipe. Disconnect the TOC line from the TOC fitting. Remove the TOC fitting from the radiator.
By BobGM Specialist
01/11/2022