Part Description: 2006 GMC Yukon Auxiliary Air Conditioner Blower Swich Assembly (At Roof Console)
More Info
Vehicle Fitment
2006 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Blower Control Switches Repair
Q: What is the removal procedure for the blower motor switch-auxiliary?
A:
You need to remove the console from the headliner and the auxiliary blower motor switch and disconnect the electrical connector.
By Bob
GM Specialist
29/10/2022
Q: How to install the blower motor switch-auxiliary?
A:
You need to connect the electrical connector and install the blower motor switch to the overhead console and the overhead console to the headliner.
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: How to install the air temperature sensor in the upper left?
A:
You need to install the upper left Air Temperature Sensor to the air distributor duct and connect the electrical connector to the upper left air temperature sensor.
Q: What should we do when the vehicle is operated in ambient temperature conditions of 23 °C (-10°F) or below?
A:
You should replace the Blower Motor control module if the vehicle experienced a blower motor control module failure in extremely cold ambient temperature conditions.
Q: What is the removal procedure for the blower motor resistor in the auxiliary?
A:
You need to remove the right rear quarter trim panel, disconnect the electrical connector from the Blower Motor Resistor, and remove the retaining screws from the blower motor resistor and the blower motor resistor.