< Back ×
My Vehicle Change Vehicle
2006 GMC Yukon
< Back to View All
A/C & Heating
- Department
- Prices
OEM (Genuine) 2006 GMC Yukon Air Temperature Sensor
PartNumber: 9152245
Product Specifications- Notes: All Models
- Item Dimensions: 2.6 x 2.3 x 1.2 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 GMC Yukon Air Temperature Sensor
Vehicle Fitment- 2006 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$25.44 MSRP:$48.02You Save: $22.58 (48%)
OEM (Genuine) 2006 GMC Yukon Air Temperature Sensor
PartNumber: 15047946
Product Specifications- Item Dimensions: 2.7 x 2.6 x 1.9 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 GMC Yukon Air Temperature Sensor
Vehicle Fitment- 2006 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$20.54 MSRP:$38.78You Save: $18.24 (48%)
OEM (Genuine) 2006 GMC Yukon In-Car Temperature Sensor
PartNumber: 12160947
Product Specifications- Notes: All Models
- Item Dimensions: 2.1 x 1.0 x 1.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 GMC Yukon In-Car Temperature Sensor
Vehicle Fitment- 2006 GMC Yukon | Denali, Denali Hybrid, Hybrid, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$7.52 MSRP:$13.62You Save: $6.10 (45%)
FAQ for Air Temperature Sensor Repair
Q: How to install the air temperature sensor in the upper left?
A:
You need to install the upper left air temperature sensor to the air distributor duct and connect the electrical connector to the upper left air temperature sensor.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the air temperature sensor in the lower auxiliary?
A:
You need to remove the right side C-pillar trim panel, disconnect the electrical connector from the auxiliary lower A/C temperature sensor, and remove the auxiliary lower A/C temperature sensor from the air distribution duct.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the mass air flow (MAF)/intake air temperature (IAT) sensor?
A:
You need to remove the air cleaner outlet duct, pull out the gray connector position assurance (CPA) retainer, push down on the black clip to disconnect the MAF/IAT sensor electrical connector, loosen the MAF/IAT clamp, and remove the MAF/IAT sensor from the air cleaner assembly.
By Bob
GM Specialist
01/11/2022Q: How to install the air temperature sensor in the upper auxiliary?
A:
You need to install the rear upper A/C temperature sensor to the air distribution duct, connect the electrical connector to the rear upper A/C temperature sensor, and install the right-side C-pillar trim panel.
By Bob
GM Specialist
01/11/2022Q: How to install the mass air flow (MAF)/intake air temperature (IAT) sensor?
A:
You need to locate the airflow direction arrow on the MAF/IAT sensor, install the MAF/IAT sensor to the air cleaner assembly, tighten the MAF/IAT clamp, connect the MAF/IAT sensor electrical connector, push in the gray CPA retainer, and install the air cleaner outlet duct.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the air temperature sensor in the upper auxiliary?
A:
You need to remove the right side C-pillar trim panel, disconnect the electrical connector from the rear upper A/C temperature sensor, and remove the rear upper A/C temperature sensor from the air distribution duct.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the ambient air temperature sensor?
A:
You need to remove the Park/Turn Signal, disconnect the electrical connector from the ambient air temperature sensor, and remove the ambient air temperature sensor.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the air temperature sensor in the upper right?
A:
You need to remove the I/P upper trim panel, disconnect the electrical connector from the upper right air temperature sensor, and remove the upper right air temperature sensor from the air distributor duct.
By Bob
GM Specialist
01/11/2022Q: How to install the air temperature sensor in the lower auxiliary?
A:
You need to install the rear lower A/C temperature sensor to the air distribution duct, connect the electrical connector to the rear lower A/C temperature sensor, and install the right-side C-pillar trim panel.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the air temperature sensor in the lower right?
A:
You need to remove the I/P lower closeout panel, the right floor duct, and the center console, disconnect the electrical connector from the lower right air temperature sensor, and remove the lower right air temperature sensor.
By Bob
GM Specialist
01/11/2022See more FAQs (11)