< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Impala
< Back to View All
Brake Dust Shields, Backing Plates & Brake Hardware
- Department
- Brands
- Prices
OEM (Genuine) 2006 Chevrolet Impala Rear Cable
PartNumber: 15242626
Product Specifications- Notes: Impala, Monte Carlo; Left
- Other Names: Park Brake Cable, Rear Cable
- Item Dimensions: 11.6 x 11.2 x 3.7 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10310911, 10405321
- Part Description: 2006 Chevrolet Impala Rear Cable
Vehicle Fitment- 2006 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$30.52 MSRP:$57.58You Save: $27.06 (47%)
Wagner® Parking Brake Cable for 2006 Chevrolet Impala
PartNumber: BC141967Product Specifications- UPC: 008536571407
- Part Description: 2006 Chevrolet Impala Parking Brake Cable
Vehicle Fitment- 2006 Chevrolet Impala | All Trims | All Engines
OEM (Genuine) 2006 Chevrolet Impala Cable Asm-Parking Brake Front
PartNumber: 15297497Product Specifications- Notes: Impala, Monte Carlo
- Other Names: Front Cable
- Item Dimensions: 11.4 x 10.8 x 3.8 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25919312, 10310909
- Part Description: 2006 Chevrolet Impala Cable Asm-Parking Brake Front
Vehicle Fitment- 2006 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2006 Chevrolet Impala Cable Asm-Parking Brake Rear
PartNumber: 15297496
Product Specifications- Notes: Impala, Monte Carlo; Right
- Other Names: Park Brake Cable, Rear Cable
- Item Dimensions: 30.6 x 9.6 x 1.3 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10310910
- Part Description: 2006 Chevrolet Impala Cable Asm-Parking Brake Rear
Vehicle Fitment- 2006 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
FAQ for Parking Brake Cable Repair
Q: What should be done before servicing the Park Brake Cable?
A:
Remove the left-side instrument panel insulator.
By Bob
GM Specialist
02/11/2022Q: What should be noticed when servicing the Park Lock Cable?
A:
Ensure the ignition key is in the RUN position. Do NOT attempt to proceed to Step 6 with the key in any other position.
By Bob
GM Specialist
02/11/2022Q: What is the purpose of tightening the nut on the equalizer?
A:
Tighten the nut on the equalizer to remove the slack in the cable.
By Bob
GM Specialist
02/11/2022Q: What should be done before servicing the Park Lock Cable?
A:
Place the shift lever in the PARK position.
By Bob
GM Specialist
02/11/2022Q: What is the installation procedure for the Park Brake Cable Equalizer?
A:
Install the equalizer assembly, connect the front brake cable to the right rear cable, connect the left rear brake cable and adjustment stud assembly to the equalizer assembly, adjust the park brake system, and lower the vehicle.
By Bob
GM Specialist
02/11/2022Q: What special tool will I need when servicing the Park Brake Cable?
A:
You will need a parking brake cable release tool.
By Bob
GM Specialist
02/11/2022Q: What should be done before servicing the Park Brake Cable Equalizer?
A:
Raise and support the vehicle.
By Bob
GM Specialist
02/11/2022See more FAQs (2)