Notes: Grade: Aftermarket; Description: Seal included; Thread Size: M12 X 1,5; Plug (Connector): 2 Pins
Colour: Black
Height [mm]: 19
Length [mm]: 19
Number of Poles: 2
Packaging Depth [cm]: 3
Packaging height [cm]: 3,3
Packaging width [cm]: 5,8
Spanner Size: 19
Supplementary Article/Supplementary Info: with seal
Thread Size: M12x1,5
Weight [kg]: 0,02962
Width [mm]: 59
Part Description: 2006 Chevrolet Equinox Engine Coolant Temperature Sensor
More Info
Vehicle Fitment
2006 Chevrolet Equinox | All Trims | 6 Cyl 3.4L
FAQ for Coolant Temperature Sensors Repair
Q: How to remove the engine coolant temperature (ETC) sensor?
A:
You can disconnect the ETC sensor harness connector and remove the ECT sensor.
By Bob
GM Specialist
01/11/2022
Q: How to install the engine coolant temperature (ETC) sensor?
A:
You can install the ECT sensor, connect the ECT sensor harness connector and fill the engine coolant to the proper level.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the ECT sensor?
A:
The recommended torque is 23 N.m (17 lb-ft).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the installation procedure for the water pump?
A:
The procedure is to install the Water Pump gasket, the water pump, the water pump bolts, the water pump pulley, the pulley bolts, and the drive belt.
Q: What is the installation procedure for the cooling fan motor?
A:
The procedure is to install the engine Cooling Fan Motor, the cooling fan motor bolts, the cooling fan motor nuts, and the fan shroud assembly.
Q: How to install the thermostat?
A:
You can install the Thermostat, the thermostat housing, the Room Temperature Vulcanizing (RTV) sealer, the thermostat housing, the thermostat housing bolts, the radiator hose, the crossover exhaust pipe, and the fuel injector sight shield.