Part Description: 2006 Chevrolet Equinox Fan Motor
More Info
Vehicle Fitment
2006 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
$74.19MSRP: $140.00
You Save: $65.81 (48%)
FAQ for Cooling Fan Motor Repair
Q: What is the installation procedure for the cooling fan motor?
A:
The procedure is to install the engine cooling fan motor, the cooling fan motor bolts, the cooling fan motor nuts, and the fan shroud assembly.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the cooling fan motor?
A:
The procedure is to remove the fan shroud assembly, the fan blade, the fan motor, and the tape covering the entry points.
By Bob
GM Specialist
01/11/2022
Q: What should be done to avoid personal injury or damage to the vehicle?
A:
Abent, cracked, or damaged fan blade or housing should always be replaced.
By Bob
GM Specialist
01/11/2022
Q: What special tool will I need when servicing the cooling fan motor?
A:
You will need a GE-47827 socket.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the cooling fan motor nuts?
A:
The recommended torque is 6 Nm (53-inch lbs.).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the installation procedure for the water pump?
A:
The procedure is to install the Water Pump gasket, the water pump, the water pump bolts, the water pump pulley, the pulley bolts, and the drive belt.
Q: How to install the thermostat?
A:
You can install the Thermostat, the thermostat housing, the Room Temperature Vulcanizing (RTV) sealer, the thermostat housing, the thermostat housing bolts, the radiator hose, the crossover exhaust pipe, and the fuel injector sight shield.
Q: How to remove the thermostat housing?
A:
You can remove the fuel injector sight shield, the crossover exhaust pipe, the radiator hose, the Thermostat Housing bolts, the thermostat housing, and the thermostat.