< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Equinox
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
Four Seasons® A C Receiver Drier for 2006 Chevrolet Equinox
PartNumber: 83217Product Specifications- Body Diameter: 1.375
- Body Length: 14.500
- Connector B Type: Pad Mount
- Connector Type: Pad Mount
- Desiccant: Yes
- Desiccant Replaceable: Not Replaceable
- Dia. MM: 34.925
- Gasket / Seals: Included
- In Line Filter Material: Desiccant
- In Line Filter Outlet Fitting Type: Pad Mount
- Inlet Filter Fitting Type: Pad Mount
- Inlet Fitting Diameter: .485
- Inlet Fraction: 1/2
- Length MM: 368.300
- Material: Aluminum
- Meets / Exceeds OEM: Yes
- Mounting Bracket Included: Hardware not included
- Outlet Fitting Type: Pad Mount
- Outlet Fraction: 1/2
- Outlet IN: .482
- Overall Depth IN: 14.500
- Overall Depth MM: 368.300
- Pad Mount: w/ Pad Mount
- Service Port: w/o Service Port
- Sight Glass: No
- Style: Aluminum Filter Drier w/ Pad Mount
- Switch Port: w/o Switch Port
- UPC: 096361832176
- Part Description: 2006 Chevrolet Equinox A C Receiver Drier
Vehicle Fitment- 2006 Chevrolet Equinox | All Trims | All Engines
$24.40
OEM (Genuine) 2006 Chevrolet Equinox Drier
PartNumber: 25901981
Product Specifications- Notes: 3.4 Liter; Equinox, Torrent
- Other Names: Dehydrator, Drier
- Item Dimensions: 5.3 x 5.1 x 19.2 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10399667, 15781444, 15806299
- Part Description: 2006 Chevrolet Equinox Drier
Vehicle Fitment- 2006 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
Denso® A/C Receiver Drier for 2006 Chevrolet Equinox
PartNumber: 478-2056Product Specifications- Notes: OE recommended replacement part.
- Body Diameter: 34.925
- Body Length: 368.300
- Inlet Fitting Type: FEMALE
- Material: Aluminum
- New or Remanufactured: NEW
- Outlet Fitting Type: FEMALE
- UPC: 042511222151
- Part Description: 2006 Chevrolet Equinox A/C Receiver Drier
Vehicle Fitment- 2006 Chevrolet Equinox | All Trims | 6 Cyl 3.4L
FAQ for A/C Receiver Drier Repair
Q: What is the recommended torque for the receiver dehydrator mounting clamp bolt?
A:
The recommended torque is 4.2N.m (37 lb in).
By Bob
GM Specialist
28/10/2022Q: How to install the receiver dehydrator?
A:
You can install the new O-rings to the receiver dehydrator, the receiver dehydrator, the lower receiver dehydrator bolt, the receiver dehydrator mounting clamp, the receiver dehydrator mounting clamp bolt, and the front bumper fascia.
By Bob
GM Specialist
28/10/2022Q: How to remove the receiver dehydrator?
A:
You will need to remove the front bumper fascia, the bolt retaining the receiver dehydrator mounting clamp, the receiver dehydrator mounting clamp, the lower receiver dehydrator bolt, and the receiver dehydrator.
By Bob
GM Specialist
28/10/2022Q: What special tool will I need when servicing the receiver dehydrator?
A:
You will need a J 39400-A Halogen Leak Detector.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the lower receiver dehydrator bolt?
A:
The recommended torque is 6.5 N.m (58 lb in).
By Bob
GM Specialist
28/10/2022