Part Description: Switch Asm, Driver Seat Adjuster *Ebony
More Info
FAQ for Power Seat Switch Repair
Q: What is the recommended torque for the seat back latch bolts?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: What should be done before servicing the Seat Back Latch?
A:
You should open the rear compartment lid before servicing the Seat Back Latch.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the switch bracket screw?
A:
The recommended torque is 5 N.m (44 lb in).
By Bob
GM Specialist
01/11/2022
Q: What should be done before servicing the Seat Switch?
A:
You should adjust the front bucket seat to the full-up position to gain access to the power seat switch.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be done before servicing the Starter Motor?
A:
You should disconnect the negative battery cable before servicing the Starter Motor.
Q: What is the removal procedure for the Body Control Module?
A:
Ensure that the ignition switch is in the off position, remove the right sound insulator, remove the Body Control Module, and disconnect the BCM connectors from the BCM.
Q: How do you remove the headlamp?
A:
You can remove the headlamp by pulling straight forward from the headlamp mounting panel.