Q: What is the removal procedure for the Air Cleaner Element?
A:
Remove the upper air cleaner screws, loosen the upper air cleaner cover, remove the air cleaner filter.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the upper air cleaner cover screws?
A:
The recommended torque is 3 N.m (26 lb in).
By Bob
GM Specialist
01/11/2022
Q: What is the installation procedure for the Air Cleaner Element?
A:
Install the air cleaner filter into the lower air cleaner housing, and install the upper air cleaner cover to the lower air cleaner housing.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the installation procedure for the Manifold Absolute Pressure Sensor?
A:
Install the MAP Sensor into the intake manifold, connect the MAP sensor harness connector, and install the accelerator cable bracket and the air cleaner outlet resonator.
Q: What should be done before servicing the Intake Manifold?
A:
You should remove the air inlet duct and resonator before servicing the Intake Manifold.
Q: What should you do after installing the cable to the pedal lever assembly?
A:
You should slip the accelerator cable through the slot in the rod of the accelerator pedal and install the retainer in the rod.