Part Description: Manifold ABSolute Pressure Sensor
More Info
FAQ for MAP Sensor Repair
Q: What is the installation procedure for the Manifold Absolute Pressure Sensor?
A:
Install the MAP sensor into the intake manifold, connect the MAP sensor harness connector, and install the accelerator cable bracket and the air cleaner outlet resonator.
By Bob
GM Specialist
01/11/2022
Q: What should be noticed when servicing the Manifold Absolute Pressure Sensor?
A:
If the MAP sensor seal is damaged, the MAP sensor must be replaced.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be done before servicing the Intake Manifold?
A:
You should remove the air inlet duct and resonator before servicing the Intake Manifold.
Q: What should you do after installing the cable to the pedal lever assembly?
A:
You should slip the accelerator cable through the slot in the rod of the accelerator pedal and install the retainer in the rod.
Q: What is the removal procedure for the Air Cleaner Element?
A:
Remove the upper air cleaner screws, loosen the upper air cleaner cover, remove the air cleaner filter.