2005 Buick Park Avenue Hood Lift Support

First, you need to install the Hood Latch release cable to the latch assembly. Then, please position the latch to the vehicle and install the bolts retaining the latch. Finally, you should close the hood, inspect the operation of the latch, and adjust the latch.

First, you need to disconnect the electrical connector from the Washer Pump and the washer solvent container level sensor, disconnect the washer hose from the washer pump, and drain the washer solvent into a suitable container. Then, please remove the brake master cylinder mounting nuts, position the brake master cylinder toward the passenger compartment, and remove the 2 nuts from the washer solvent container. The washer solvent container has a tab located in a slot in the vehicle body rail. Finally, you should remove the washer solvent container from the vehicle, remove the washer pump and the grommet from the washer solvent container, and remove the washer solvent level sensor from the washer solvent container.

First, you need to remove the door trim panel and the water deflector. Then, please disconnect the electrical connector and remove the power Window Motor.