2005 Buick Park Avenue Alloy Wheels

You need to apply GM P/N 12345884 or equivalent to the tire bead and the wheel rim.

First, you need to use a tire changing machine to dismount tires. Then, you can't scratch or damage the clear coating on aluminum wheels with the tire-changing equipment.

First, you need to remove the tire and wheel, inflate the tire to the manufactures specified pressure, locate the leak, indicate the leak areas, indicate the orientation of the tire to the wheel, and remove the tire from the wheel. Then, please scuff the inside of the rim surface at the leak area, clean the leak area, and apply a 3 mm (0.12 inch) thick layer of adhesive/sealant, GM P/N 1052366 or equivalent, to the leak area. You also need to align the inscribed mark on the tire with the valve stem on the wheel, install the tire to the wheel, inflate the tire to the manufactures specified pressure, and submerge the tire/wheel into a water bath. Finally, you should balance the tire and wheel, install the tire and wheel, and lower the vehicle.

First, you need to remove the tire and wheel assembly, remove the balance weights from the wheel, and remove the tire from the wheel. Then, please use a suitable cleaner to remove lubricants, wax, and dirt, remove the paint from the wheel, mask the wheel mounting surface and the wheel nut contact surface, and follow the paint manufacturer's instructions for painting the wheel. Finally, you should unmask the wheel, install a new valve stem, install the tire to the wheel, use a suitable cleaner to remove the corrosion, overspray, and dirt, and install the tire and wheel assembly.