2005 Buick Park Avenue Parking Brake Cable

First, you need to connect the intermediate park brake cable to the equalizer, connect the right rear parking brake cable to the intermediate park brake cable, insert the intermediate park brake cable into the cable retaining bracket and lock the intermediate park brake cable into place. Then, please connect the front of the intermediate park brake cable to the park brake cable connector, and install the front park brake cable to the cable guides. Finally, you should lower the vehicle, and ensure that the park brake cable retainers are seated.

First, you need to remove the left rear tire and wheel assembly and remove the front park brake cable from the cable guides. Then, please disconnect the intermediate park brake cable from the park brake cable connector, disconnect the left rear park brake cable from the equalizer, and disconnect the left park brake cable from the park brake lever. Finally, you should depress the locking tabs on the left park brake cable, and remove the left park brake cable from the caliper park brake cable bracket and the rear support mounting bracket.

You need to use the J 37043 Parking Brake Cable Release Tool.

The recommended torque is 24 N.m (18 lb-ft).

First, you need to remove the front park brake cable from the cable guides, pull down on the intermediate park brake cable and remove it from the park brake cable connector. Then, please disconnect the intermediate cable housing from the cable retaining bracket, and disconnect the intermediate cable from the right rear park brake cable and the rear equalizer. Finally, you should remove the intermediate cable.