< Back ×
My Vehicle Change Vehicle
2005 Buick LeSabre
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
Gates® Hvac Heater Molded Hose for 2005 Buick LeSabre
PartNumber: 19759Product Specifications- Centerline Length (in): 24.3"
- Inside Diameter 1 (in): 0.75"
- Number of Branches: 0
- UPC: 072053561975
- Part Description: 2005 Buick LeSabre Hvac Heater Molded Hose
Vehicle Fitment- 2005 Buick LeSabre | All Trims | 6 Cyl 3.8L
$18.52
Dayco® Small Id Hvac Heater Hose for 2005 Buick LeSabre
PartNumber: 88416Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: Y
- End 1 Inside Diameter: 3/4
- End 2 Inside Diameter: 3/4
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 18 1/2
- UPC: 036687183095
- Part Description: 2005 Buick LeSabre Small Id Hvac Heater Hose
Vehicle Fitment- 2005 Buick LeSabre | All Trims | All Engines
$15.55
Dayco® Small Id Hvac Heater Hose for 2005 Buick LeSabre
PartNumber: 87785Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/8
- End 2 Inside Diameter: 5/8
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 17
- UPC: 036687165091
- Part Description: 2005 Buick LeSabre Small Id Hvac Heater Hose
Vehicle Fitment- 2005 Buick LeSabre | All Trims | All Engines
$11.26
Gates® Hvac Heater Molded Hose for 2005 Buick LeSabre
PartNumber: 18569Product Specifications- Centerline Length (in): 25.4"
- Inside Diameter 1 (in): 0.61"
- Number of Branches: 0
- UPC: 770075563600
- Part Description: 2005 Buick LeSabre Hvac Heater Molded Hose
Vehicle Fitment- 2005 Buick LeSabre | All Trims | 6 Cyl 3.8L
$18.52
Dayco® Molded Heater Hose for 2005 Buick LeSabre
PartNumber: 88000Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 3/8
- End 1 Outside Diameter: 11/16
- End 2 Inside Diameter: 3/8
- End 2 Outside Diameter: 11/16
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 25 1/2
- UPC: 036687930200
- Part Description: 2005 Buick LeSabre Molded Heater Hose
Vehicle Fitment- 2005 Buick LeSabre | All Trims | All Engines
FAQ for Heater Hose Repair
Q: How to remove the Heater Pipe Adapter-Inlet?
A:
You should drain the cooling system, remove the heater hose from the heater inlet pipe adapter using the J 38185, remove the bolt from the heater pipe adapter and remove the heater inlet pipe adapter from the engine.
By Bob
GM Specialist
01/11/2022Q: How to install the Heater Hoses?
A:
You should install the heater hoses onto the heater pipe adapters, install the heater hoses onto the heater core, install the heater hose clamps, install the fuel injector sight shield and fill the cooling system.
By Bob
GM Specialist
01/11/2022Q: How to remove the Heater Pipe Adapter-Outlet?
A:
You should drain the cooling system, remove the heater hose from the heater inlet pipe adapter using the J 38185, remove the bolt from the heater pipe adapter and remove the heater inlet pipe adapter from the engine.
By Bob
GM Specialist
01/11/2022Q: How to install the Heater Pipe Adapter-Inlet?
A:
You should install the heater inlet pipe adapter to the engine, install the heater pipe adapter bolt, install the heater hose to the heater pipe adapter and reposition the clamp using the J 38185 and fill the cooling system.
By Bob
GM Specialist
01/11/2022Q: How to remove the Heater Hoses?
A:
You should drain the cooling system, remove the fuel injector sight shield, position the J 38185 to remove the heater hose clamps, remove the heater hoses from the heater core and remove the heater hoses from the heater pipe adapters.
By Bob
GM Specialist
01/11/2022Q: How to install the Heater Pipe Adapter-Outlet?
A:
You should install the heater inlet pipe adapter to the engine, install the heater pipe adapter bolt, install the heater hose to the heater pipe adapter and reposition the clamp using the J 38185 and fill the cooling system.
By Bob
GM Specialist
01/11/2022See more FAQs (1)