< Back ×
My Vehicle Change Vehicle
2005 Buick Century
< Back to View All
Air Filters & Intake Systems
- Department
- Brands
- Prices
Dorman® Aluminum Aluminum Intake Manifold for 2005 Buick Century
PartNumber: 615-284Product Specifications- Air Conditioning Compressor Mount: No
- Alternator Mount: No
- Center Maximum Height: 5"
- Color: Aluminum
- EGR Ready: Yes
- Finish: Aluminum
- Front Maximum Height: 5"
- Gasket or Seal Included: No
- Grade Type: Regular
- Heated Choke Port: No
- High-Riser: No
- Intake Manifold Material: Aluminum
- Length: 18.5"
- Manifold Height: 5"
- Material: Aluminum
- Mount Hole Diameter: 0.37"
- Mounting Holes: 8
- OE Part Number: 12590280
- Port Outlet Dimensions: 2"; 1.3"
- Port Quantity: 6
- Rear Maximum Height: 5"
- UPC: 885484753648
- Width: 12"
- Part Description: 2005 Buick Century Aluminum Aluminum Intake Manifold
Vehicle Fitment- 2005 Buick Century | All Trims | 6 Cyl 3.1L
$209.52
OEM (Genuine) 2005 Buick Century Manifold Asm-Upper Intake
PartNumber: 24507499
Product Specifications- Notes: All Models; 3.1l; Upper
- Other Names: Intake Manifold
- Item Dimensions: 9.1 x 21.6 x 12.4 inches
- Item Weight: 7.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Buick Century Manifold Asm-Upper Intake
Vehicle Fitment- 2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
OEM (Genuine) 2005 Buick Century Manifold, Lower Intake
PartNumber: 12590280
Product Specifications- Notes: All Models; 3.1l; Lower
- Other Names: Intake Manifold, Manifold
- Item Dimensions: 19.9 x 13.9 x 8.0 inches
- Item Weight: 12.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 24507497, 12582983, 12579681
- Part Description: 2005 Buick Century Manifold, Lower Intake
Vehicle Fitment- 2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
Dorman® Aluminum Intake Manifold for 2005 Buick Century
PartNumber: 615-197Product Specifications- Air Conditioning Compressor Mount: No
- Alternator Mount: No
- Color: Silver
- EGR Ready: Yes
- Gasket or Seal Included: No
- Grade Type: Regular
- Heated Choke Port: No
- High-Riser: No
- Intake Manifold Material: Aluminum
- Manifold Height: 4"
- Material: Aluminum
- OE Part Number: 24507499, 24507501
- Plenum Style: Single Plane
- Port Outlet Dimensions: 25 x 81 mm
- Port Quantity: 6
- UPC: 019495289562
- Part Description: 2005 Buick Century Aluminum Intake Manifold
Vehicle Fitment- 2005 Buick Century | All Trims | 6 Cyl 3.1L
FAQ for Intake Manifold Repair
Q: What is the recommended torque for the heater inlet pipe nut?
A:
The recommended torque is 25 Nm (18 ft. lbs).
By Bob
GM Specialist
01/11/2022Q: What should the vacuum hoses be installed to?
A:
It should be installed to the windshield washer system, brake booster to the upper intake manifold, manifold vacuum source, evaporative emissions (EVAP) canister purge valve, and fuel pressure regulator.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the water outlet bolts?
A:
The recommended torque is 25 Nm (18 ft. lbs).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the ECT sensor?
A:
The recommended torque is 25 Nm (18 ft. lbs).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the fuel pipe clip bolt?
A:
The recommended torque is 8 Nm (71-inch lbs.).
By Bob
GM Specialist
01/11/2022Q: What should be installed/removed from the retainers?
A:
You need to install/remove the engine wiring harness, left side to spark plug wire harness, and Camshaft Position (CMP) sensor wiring harness to/from retainers.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the upper intake manifold bolts and the stud?
A:
The recommended torque is 25 Nm (18 ft. lbs.).
By Bob
GM Specialist
01/11/2022See more FAQs (2)