FAQ for Door Seal Repair
Q: How do you install the Weatherstrip-Front Door Opening?
A:
You need to install the weatherstrip to the flange on the body and the carpet retainers and close the front door.
By BobGM Specialist
01/11/2022 Q: How do you install the Weatherstrip-Rear Door?
A:
You need to install the rear door weatherstrip on the rear door, the upper half of the rear door weatherstrip pushing the weatherstrip into the track and the lower half of the rear door weatherstrip, pressing in on the retainers until each retainer is fully seated, and close the rear door.
By BobGM Specialist
01/11/2022 Q: How do you remove the Weatherstrip-Front Door Opening?
A:
You need to open the front door and remove the carpet retainers and the front door weatherstrip by pulling it off the pinch-weld flange.
By BobGM Specialist
01/11/2022 Q: How do you install the Weatherstrip-Front Door?
A:
You need to position the front door weatherstrip to the front door, press the upper half of the front door weatherstrip into the front door weatherstrip track until fully seated and the lower half of the front door weatherstrip at the retainers into the front door until fully seated, and close the front door.
By BobGM Specialist
01/11/2022 Q: How do you remove the Weatherstrip-Front Door?
A:
You need to open the front door, use the J 38778 to remove the lower half of the front door weatherstrip and retainers from the front door, pull the upper half of the front door weatherstrip from the front door weatherstrip track and remove the front door weatherstrip from the front door.
By BobGM Specialist
01/11/2022 Q: How do you install the Weatherstrip-Rear Door Opening?
A:
You need to install the weatherstrip on the door, push the upper edges of the weatherstrip onto the door and push and seat the lower edges of the weatherstrip and retainers onto the door, and install the rear carpet retainers.
By BobGM Specialist
01/11/2022 Q: How do you remove the Weatherstrip-Rear Door?
A:
You need to open the rear door and remove the lower half of the rear door weatherstrip and retainers using J 38778, the upper half of the rear door weatherstrip pulling the weatherstrip from the track, and the rear door weatherstrip from the rear door.
By BobGM Specialist
01/11/2022 Q: How do you remove the Weatherstrip-Rear Door Opening?
A:
You need to remove the rear carpet retainers, pull the lower edges of the weatherstrip and retainers away from the door and the upper edges of the weatherstrip from the door and remove the weatherstrip from the door.
By BobGM Specialist
01/11/2022 See more FAQs (3)