< Back ×
My Vehicle Change Vehicle
2005 Buick Century
< Back to View All
Light Relays, Switches & Control Modules
- Department
- Prices
OEM (Genuine) 2005 Buick Century Switch Asm-Parking Brake Indicator
PartNumber: 1264464
Product Specifications- Notes: All Models
- Other Names: Park Brake Warning Switch, Stoplamp Switch, Switch
- Item Dimensions: 3.2 x 2.1 x 2.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Buick Century Switch Asm-Parking Brake Indicator
Vehicle Fitment- 2005 Buick Century | Custom, Estate Wagon, Limited, Special, Special Edition, T-Type | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
$12.90 MSRP:$24.38You Save: $11.48 (48%)OEM (Genuine) 2005 Buick Century Switch Asm-Stop Lamp&Torque Converter Clutch
PartNumber: 10424858
Product Specifications- Notes: All Models
- Other Names: Brake Switch, Release Switch, Stoplamp Switch
- Item Dimensions: 4.1 x 2.1 x 2.2 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Buick Century Switch Asm-Stop Lamp&Torque Converter Clutch
Vehicle Fitment- 2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
FAQ for Brake Light Switches Repair
Q: How do you remove the Stop Lamp Switch?
A:
You need to remove the left instrument panel (I/P) insulator, disconnect the electrical connector from the stop lamp switch and remove the stop lamp switch from the brake pedal bracket.
By Bob
GM Specialist
29/10/2022Q: How to adjust the Stop Lamp Switch?
A:
With the brake pedal in the fully released position, you need to ensure that the stop lamp plunger is fully depressed against the brake pedal shanks, fully insert the stop lamp switch and the cruise control switch, if equipped, into the brake pedal bracket, and push the brake pedal forward to set the brake push rod into the booster, pull the brake pedal to the rear, against the internal stop and inspect the stop lamp switch for proper adjustment.
By Bob
GM Specialist
29/10/2022Q: How do you install the Stop Lamp Switch?
A:
You need to install the stop lamp switch to the brake pedal bracket, connect the electrical connector to the stop lamp switch, adjust the stop lamp switch and install the left I/P insulator.
By Bob
GM Specialist
29/10/2022