2004 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Window Switch Repair
Q: What is the recommended torque when installing the bolts to the window regulator?
A:
You can tighten the bolts to 9 N.m (80 lb in).
By Bob
GM Specialist
02/11/2022
Q: What is the recommended torque when installing the bolts retaining the regulator to the door?
A:
You can tighten the bolts to 9 N.m (7 lb-ft).
By Bob
GM Specialist
02/11/2022
Q: What is the first step for replacing the rear power window module?
A:
The first step is to raise and support the window glass.
By Bob
GM Specialist
02/11/2022
Q: How do you replace the front power window module?
A:
You can remove the following: the trim panel, the water deflector, the 2 bolts that hold the window glass to the regulator, the bolts from the window regulator, and the window regulator assembly from the door.
By Bob
GM Specialist
02/11/2022
Q: What is the removal procedure for the rear door power window switch?
A:
The procedure is to pry the door power window switch from the door trim panel and disconnect the electrical connector from the switch.
By Bob
GM Specialist
01/11/2022
Q: How do you install the rear door power window switch?
A:
You can connect the electrical connector to the switch and install the switch to the door trim panel.
By Bob
GM Specialist
01/11/2022
See more FAQs (1)
FAQ for Other Repair Info
Q: What should you remove if the window motor is inoperable?
A:
You should remove the window to gain access to the Window Motor retaining screws.
Q: What is the removal procedure for the front power window module?
A:
The procedure is to remove the following: the trim panel, the water deflector, the 2 bolts that hold the window glass to the regulator, the bolts from the Window Regulator, and the window regulator assembly.