Part Description: 2004 GMC Yukon Manual Window Regulator
Vehicle Fitment
2004 GMC Yukon | All Trims | All Engines
1-30 of 42 Results
< Previous
12
Next >
FAQ for Window Regulator Repair
Q: What is the recommended torque when installing the bolts retaining the regulator to the door?
A:
You can tighten the bolts to 9 N.m(7 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque when installing the bolts to the window regulator?
A:
You can tighten the bolts to 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the front power window module?
A:
The procedure is to remove the following: the trim panel, the water deflector, the 2 bolts that hold the window glass to the regulator, the bolts from the window regulator, and the window regulator assembly.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque when tightening the clamp bolts?
A:
You can tighten the clamp bolts to 9 N.m(7 lb-ft).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should you remove if the window motor is inoperable?
A:
You should remove the window to gain access to the Window Motor retaining screws.
Q: What is the removal procedure for the rear door power window switch?
A:
The procedure is to pry the door power Window Switch from the door trim panel and disconnect the electrical connector from the switch.