Part Description: 2004 Chevrolet Silverado 1500 Shield-Exhaust Manifold Heat
More Info
Vehicle Fitment
2004 Chevrolet Silverado 1500 | Base, LS, LT, WT, Z71 | 6 Cyl 4.3 L GAS
FAQ for Exhaust Heat Shield Repair
Q: What is the proper way to install the dash panel exhaust heat shield?
A:
The proper way is to install the shield thru the passenger side wheelwell, the exhaust heat shield, and the exhaust heat shield nuts.
By Bob
GM Specialist
29/10/2022
Q: What is the removal procedure for the dash panel exhaust heat shield?
A:
The procedure is to raise and suitably support the vehicle, remove the exhaust heat shield nuts, the exhaust heat shield, and the shield out thru the passenger side wheel well.
By Bob
GM Specialist
29/10/2022
Q: What is the proper way to install the exhaust heat shield?
A:
The proper way is to install the exhaust heat shield, the exhaust heat shield bolts, the spare tire hoist, and the exhaust muffler.
By Bob
GM Specialist
29/10/2022
Q: What is the removal procedure for the exhaust heat shield?
A:
The procedure is to remove the exhaust muffler, the spare tire hoist, and the exhaust heat shield.
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the muffler?
A:
The procedure is to remove the exhaust Muffler nuts, the muffler brackets, and the exhaust muffler.
Q: What should be done if the vehicle is equipped with a 4.3L, 4.8L, or 5.3L engine during the removal procedure?
A:
You should remove the clip from around the engine harness and the oxygen sensor pigtail, and disconnect the connector position assurance (CPA) retainer. And then disconnect the forward oxygen sensor electrical connector.