Part Description: 2004 Chevrolet Silverado 1500 Mount Bracket
More Info
Vehicle Fitment
2004 Chevrolet Silverado 1500 | Base, LS, LT, WT, Z71 | 6 Cyl 4.3 L GAS
FAQ for Engine Mount Repair
Q: What is the proper way to install the left engine mount?
A:
The proper way is to install the engine mount bracket, the engine mount bracket bolts, the engine mount side bracket bolts, and the engine mount.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to install the front engine crossmember?
A:
The proper way is to install the crossmember, the bolts, and the differential carrier shield.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the front engine cross-member?
A:
The procedure is to remove the differential carrier shield, the bolts, and the cross-member.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the right exhaust manifold?
A:
The procedure is to remove the engine mount, the oil pan skid plate bolts, the plate, and the engine mount bracket.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the left engine mount?
A:
The procedure is to remove the engine mount, the oil pan skid plate bolts, the plate, and the engine mount bracket.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the proper way to install the engine oil and oil filter?
A:
The proper way is to lubricate the Oil Filter gasket with clean engine oil, install the oil filter and the drain plug, and then fill the engine with the proper capacity and quality of engine oil.
Q: What is the removal procedure for the heated oxygen sensor?
A:
The procedure is to raise and suitably support the vehicle, disconnect the connector position assurance (CPA) retainer and the heated Oxygen Sensor (HO2S) electrical connector, and then remove the bank 1 HO2S.
Q: What is the removal procedure for the valve rocker arm and push rod?
A:
The procedure is to remove the rocker's arms, the rocker arm supports, and the Pushrods.