Part Description: 2004 Chevrolet Silverado 1500 Front Side Door Lock Assembly *Marked Print
More Info
Vehicle Fitment
2004 Chevrolet Silverado 1500 | Base, Hybrid, LS, LT, SS, WT, Z71 | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L ELECTRIC/GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Door Lock Actuator Repair
Q: What is the proper way to install the rear door lock actuator?
A:
The proper way is to install the control rods, the door lock actuator, the water deflector, and the door trim panel.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to install the front door lock actuator?
A:
The proper way is to install the control rods, the door lock actuator, the bolts, the water deflector, and the door trim panel.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the front door lock actuator?
A:
The procedure is to remove the door trim panel, the water deflector, the rubber plug, the bolts, the door lock actuator, and the control rods.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the rear door lock actuator?
A:
The procedure is to remove the door trim panel, the water deflector, the rubber plug, the bolts, the door lock actuator, and the control rods.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be noticed about the rear door hinge pin and bushing replacement?
A:
The Door Hinge pins and bushings are not replaceable. If the hinge pins or bushings are damaged, replace the door hinge as an assembly.
Q: What is the proper way to install the front assist handle?
A:
The proper way is to install the assist handle through the opening in the headliner, the retainer in the direction, and the headliner.
Q: What is the removal procedure for the door check link?
A:
The procedure is to remove the door trim panel, the water deflector, the body-side check strap bolt, the check strap plug, the door-side check strap nuts, and the check strap.