Part Description: 2004 Chevrolet Silverado 1500 Rear Door Latch Assembly
More Info
Vehicle Fitment
2004 Chevrolet Silverado 1500 | Base, Hybrid, LS, LT, SS, WT, Z71 | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L ELECTRIC/GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Door Latch Assembly Repair
Q: What is the proper way to install the side door upper latch?
A:
The proper way is to install the latch rod, the latch retaining bolts, and the door trim panel.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the side door lower latch?
A:
The procedure is to remove the door trim panel and the latch retaining nuts, and then disconnect the latch rod from the latch.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to install the side door lower latch?
A:
The proper way is to install the latch rod, the latch retaining bolts, and the door trim panel.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the side door upper latch?
A:
The procedure is to remove the door trim panel and the latch retaining bolts and then disconnect the latch rod from the latch.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be noticed about the door hinge pin and bushing replacement?
A:
You should know that the Door Hinge pins and bushings are not replaceable. If the hinge pins or bushings are damaged, replace the door hinge as an assembly.
Q: What is the proper way to install the rear door lock actuator?
A:
The proper way is to install the control rods, the Door Lock Actuator, the water deflector, and the door trim panel.
Q: What is the proper way to install the front assist handle?
A:
The proper way is to install the assist handle through the opening in the headliner, the retainer in the direction, and the headliner.