< Back ×
My Vehicle Change Vehicle
2004 Chevrolet Silverado 1500
< Back to View All
Cigarette Lighters
- Department
- Prices
OEM (Genuine) 2004 Chevrolet Silverado 1500 Lighter Housing
PartNumber: 25774623
Product Specifications- Notes: W/O Denali, 2003-07, Front;W/O Denali, 2003-07, Rear; W/Denali, 2003-07, Rear; W/Denali, 2003-07, Front
- Item Dimensions: 2.8 x 1.5 x 1.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1999477, 12450044, 01999477
- Part Description: 2004 Chevrolet Silverado 1500 Lighter Housing
Vehicle Fitment- 2004 Chevrolet Silverado 1500 | Base, Custom, Custom Trail Boss, High Country, Hybrid, LS, LT, LT Trail Boss, LTZ, RST, SS, SSV, WT, XFE, Z71 | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L ELECTRIC/GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$7.04 MSRP:$10.60You Save: $3.56 (34%)
OEM (Genuine) 2004 Chevrolet Silverado 1500 Receptacle Asm, Cigarette Lighter
PartNumber: 25776667
Product Specifications- Notes: W/O Denali, 2003-07; W/Denali, 2003-07
- Item Dimensions: 2.8 x 1.6 x 1.2 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12450043
- Part Description: 2004 Chevrolet Silverado 1500 Receptacle Asm, Cigarette Lighter
Vehicle Fitment- 2004 Chevrolet Silverado 1500 | Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L ELECTRIC/GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$12.58 MSRP:$18.70You Save: $6.12 (33%)
OEM (Genuine) 2004 Chevrolet Silverado 1500 Lighter Assembly
PartNumber: 11516141
Product Specifications- Notes: W/O Denali, 2003-07; W/Denali, 2003-07
- Other Names: Lighter, Lighter Assembly, Tray
- Item Dimensions: 2.4 x 1.4 x 0.9 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1999434, 3534408, 14004942, 17057195, 344802, 90566933, 00344802, 01999434, 10025707, 03534408
- Part Description: 2004 Chevrolet Silverado 1500 Lighter Assembly
Vehicle Fitment- 2004 Chevrolet Silverado 1500 | Base, Hybrid, LS, LT, LTZ, SS, WT, XFE, Z71 | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L ELECTRIC/GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
$8.97 MSRP:$12.87You Save: $3.90 (31%)
OEM (Genuine) 2004 Chevrolet Silverado 1500 Lighter
PartNumber: 23202298
Product Specifications- Other Names: Lighter
- Item Dimensions: 2.3 x 1.4 x 1.0 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1999433, 25617713, 10098576, 25600663, 01999433, 10060404, 11516146, 11516140
- Part Description: 2004 Chevrolet Silverado 1500 Lighter
Vehicle Fitment- 2004 Chevrolet Silverado 1500 | Base, Hybrid, LS, LT, LTZ, SS, WT, XFE, Z71 | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L ELECTRIC/GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
$13.06
FAQ for Cigarette Lighters Repair
Q: What is the proper way to install the 12-volt accessory power receptacle?
A:
The proper way is to insert the plastic ring into the opening and snap the plastic ring into place, connect the electrical connector, and then install the power supply fuse.
By Bob
GM Specialist
29/10/2022Q: What is the description of the power outlets?
A:
The description is that the 120-volt auxiliary power outlets (APO) are located in the cab and within the pickup bed. The APOs provide 120 volts A/C at 60 hertz with a total circuit current of 20 amps. All of the APOs are protected by a ground fault detector located in the starter generator control module (SGCM).
By Bob
GM Specialist
29/10/2022Q: What is the description for the APO switch indicator?
A:
The description is that if the APO switch indicator is commanded on, the APO switch indicator will illuminate with 100% illumination. When the APO switch indicator is commanded off, the APO switch lamp will be turned off.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the 120-volt receptacle?
A:
The procedure is to remove the receptacle outlet screws and the receptacle outlet and then disconnect the receptacle electrical connections.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the 12-volt accessory power receptacle?
A:
The procedure is to remove the power supply fuse, lift the front cover of the receptacle, hold the plastic ring in place, and then remove the electrical connector from the socket.
By Bob
GM Specialist
29/10/2022Q: What is the proper way to install the 120-volt receptacle?
A:
The proper way is to connect the receptacle electrical connections, and then install the receptacle outlet and the receptacle outlet screws.
By Bob
GM Specialist
29/10/2022See more FAQs (1)