FAQ for Alternator Repair
Q: What is the proper way to install the generator cable?
A:
The proper way is to install the generator cable, the generator cable nut, and the engine sight shield, and then connect the negative battery cable.
By BobGM Specialist
28/10/2022 Q: What should be known about the generator?
A:
You should know that the AD stands for air-cooled dual internal fan. the 2 is an electrical design designator. the 30/44 denotes the outside diameter of the stator laminations in millimeters, over 100 millimeters, and the generators are rated at 102 and 130 amperes respectively.
By BobGM Specialist
28/10/2022 Q: What is the purpose of this bulletin?
A:
The purpose of this bulletin is to inform the technician of an incorrect Amp code stamped on the generator. The code on the side of the generator reads 130 A and it should read 145 A.
By BobGM Specialist
28/10/2022 Q: What is the proper way to install the generator bracket?
A:
The proper way is to install the generator bracket, the generator, the cooling fan, the drive belt, the air cleaner adapter nut, and the PCV hose.
By BobGM Specialist
28/10/2022 Q: What is the removal procedure for the generator cable?
A:
The procedure is to disconnect the negative battery cable and remove the engine sight shield, the generator cable from the generator, and the junction block.
By BobGM Specialist
28/10/2022 Q: What is the removal procedure for the generator?
A:
The procedure is to remove the drive belt, the generator cable, the generator bolts, and the generator.
By BobGM Specialist
28/10/2022 Q: What is the proper way to install the generator?
A:
The proper way is to install the generator, the generator bolts, the generator cable, and the drive belt.
By BobGM Specialist
28/10/2022 Q: What is the removal procedure for the generator bracket?
A:
The procedure is to remove the positive crankcase ventilation (PCV) hose, the air cleaner adapter nut, the cooling fan, the drive belt, the generator, and the generator bracket.
By BobGM Specialist
28/10/2022 See more FAQs (3)