Notes: Grade: Aftermarket; w/Harness; For GVW Ratings 6.400lb; 7.200lb ;Grade: Aftermarket; w/Harness; w/Special Edition (Merchandising Option); w/Pkg, Spring Special; w/Perf Pkg HO, Eng
Braking / Drive Dynamics: for vehicles with ABS
Height [mm]: 45
Length [mm]: 775
Packaging Depth [cm]: 12,85
Packaging height [cm]: 4,5
Packaging width [cm]: 4
Rated Voltage [V]: 12
Weight [kg]: 0,076
Width [mm]: 40
Part Description: 2004 Chevrolet Silverado 1500 Front ABS Speed Sensor
More Info
Vehicle Fitment
2004 Chevrolet Silverado 1500 | All Trims | 6 Cyl 4.3L
2004 Chevrolet Silverado 1500 | All Trims | 8 Cyl 4.8L
2004 Chevrolet Silverado 1500 | All Trims | 8 Cyl 5.3L
2004 Chevrolet Silverado 1500 | All Trims | 8 Cyl 6.0L
Show More
FAQ for ABS Wheel Speed Sensor Repair
Q: What is the removal procedure for the wheel speed sensor?
A:
The procedure is to remove the tire and wheel, the brake rotor, the WSS cable mounting clip, the WSS cable electrical connector, and the wheel speed sensor (WSS) mounting bolt.
By Bob
GM Specialist
28/10/2022
Q: What is the proper way to install the wheel speed sensor?
A:
The proper way is to install the WSS, the WSS mounting bolt, the WSS cable mounting clip, the brake rotor, and the tire and wheel.
By Bob
GM Specialist
28/10/2022
FAQ for Other Repair Info
Q: What is the procedure for park brake adjustment?
A:
The procedure is to set the J 21177-A, position the J 21177-A over the shoe, turn the adjuster nut until the lining just contacts the J 21177-A, and then the clearance between the park brake shoe and the rotor is 0.6604 mm (0.026 inches).
Q: What is the removal procedure for the electronic brake control module (EBCM)?
A:
The procedure is to disconnect the chassis electrical connectors, remove the mounting screws, and the EBCM, and then clean the BPMV to EBCM mounting surfaces with a clean cloth.