Part Description: 2004 Cadillac SRX Premium HVAC Heater Molded Hose
More Info
Vehicle Fitment
2004 Cadillac SRX | All Trims | 6 Cyl 3.6L
FAQ for Heater Hose Repair
Q: What tool can you use to slide the hose clamp away from the base of the heater hose?
A:
You can use J 38185.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque when installing the cowl panel retaining bolts?
A:
You can tighten the bolts to 6 N.m (13 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque when you install the cowl panel retaining bolts?
A:
You can tighten the bolts to 6 N.m (13 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: What tool can you use to slide the clamp away from the base of the heater inlet hose?
A:
You can use J 38185.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the ambient air temperature sensor?
A:
The procedure is to disconnect the ambient Air Temperature Sensor electrical connector, release the ambient air temperature sensor from the clip and remove the ambient air temperature sensor from the vehicle.
Q: How do you install the auxiliary blower motor resistor?
A:
You can install the Blower Motor Resistor, install the blower motor resistor screws, connect the electrical connector to the blower motor resistor and install the left body side trim access panel.
Q: What is the removal procedure for the heater core?
A:
The procedure is to remove the following: the HVAC module, the Heater Core pipe bracket screw, the heater core pipe bracket, and the heater core.