2004 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
FAQ for Heater Core Repair
Q: What is the removal procedure for the heater core?
A:
The procedure is to remove the following: the HVAC module, the heater core pipe bracket screw, the heater core pipe bracket, and the heater core.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque when installing the heater core pipe bracket screw?
A:
You can tighten the screws to 1 N.m (9 lb in).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the ambient air temperature sensor?
A:
The procedure is to disconnect the ambient Air Temperature Sensor electrical connector, release the ambient air temperature sensor from the clip and remove the ambient air temperature sensor from the vehicle.
Q: How do you install the auxiliary blower motor resistor?
A:
You can install the Blower Motor Resistor, install the blower motor resistor screws, connect the electrical connector to the blower motor resistor and install the left body side trim access panel.
Q: What is the recommended torque when installing the power steering cooler line to condenser retaining bolts?