Notes: OE Recommended Replacement filter; Premium activated charcoal media; Removes odors in addition to capturing pollen, dust, & other allergens
Filter Media Material: CHARCOAL
Height: 0.9
Length: 9.1
Reusable: No
UPC: 042511091115
Width: 10.44
Part Description: 2004 Cadillac SRX Cabin Air Filter
More Info
Vehicle Fitment
2004 Cadillac SRX | All Trims | 6 Cyl 3.6L
2004 Cadillac SRX | All Trims | 8 Cyl 4.6L
FAQ for Cabin Air Filter Repair
Q: How do you install the passenger compartment air filter?
A:
You can install the following: the filter, the filter access cover, and the air inlet grille access panel.
By Bob
GM Specialist
29/10/2022
Q: What is the removal procedure for the passenger compartment air filter housing?
A:
The procedure is to remove the air inlet grille panel, release the tabs on each side of the access cover, remove the filter access cover, remove the filter, pry out on the filter housing and remove the passenger air filter housing.
By Bob
GM Specialist
29/10/2022
Q: What is the removal procedure for the passenger compartment air filter?
A:
The procedure is to remove the air inlet grille access panel, release the tabs on each side of the access cover, remove the filter access cover and remove the filter.
By Bob
GM Specialist
29/10/2022
Q: What should you ensure after pressing the passenger air filter housing until all clips engage into the sheet metal?
A:
You should ensure that there is a good seal between the passenger air filter housing and the sheet metal.
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the ambient air temperature sensor?
A:
The procedure is to disconnect the ambient Air Temperature Sensor electrical connector, release the ambient air temperature sensor from the clip and remove the ambient air temperature sensor from the vehicle.
Q: How do you install the auxiliary blower motor resistor?
A:
You can install the Blower Motor Resistor, install the blower motor resistor screws, connect the electrical connector to the blower motor resistor and install the left body side trim access panel.
Q: What is the removal procedure for the heater core?
A:
The procedure is to remove the following: the HVAC module, the Heater Core pipe bracket screw, the heater core pipe bracket, and the heater core.