< Back ×
My Vehicle Change Vehicle
2004 Cadillac Escalade EXT
< Back to View All
Rocker Panels & Floors
- Department
- Prices
OEM (Genuine) 2004 Cadillac Escalade EXT Center Floor Pan
PartNumber: 15950125
Product Specifications- Other Names: Center Floor Pan
- Item Dimensions: 67.1 x 11.6 x 62.8 inches
- Item Weight: 33.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 93440690
- Part Description: Center Floor Pan
$334.45 MSRP:$504.57You Save: $170.12 (34%)
OEM (Genuine) 2004 Cadillac Escalade EXT Floor Pan
PartNumber: 20867259
Product Specifications- Other Names: Floor Pan, Rear Floor Pan
- Item Dimensions: 69.4 x 65.5 x 2.5 inches
- Item Weight: 39.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15841876, 15074881
- Part Description: Floor Pan
OEM (Genuine) 2004 Cadillac Escalade EXT Panel-Front Floor
PartNumber: 25910526
Product Specifications- Other Names: Front Floor Pan
- Item Dimensions: 63.7 x 46.4 x 13.0 inches
- Item Weight: 27.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25880945, 25788109, 15704774
- Part Description: Panel-Front Floor
FAQ for Floor Pan Repair
Q: What is the installation procedure for the floor panel heat shield?
A:
You need to install the exhaust heat shield to the studs, the exhaust heat shield nuts, the exhaust front heat shield to the studs, the exhaust front heat shield nuts, the catalytic converter, and the exhaust manifold pipe if necessary.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the floor panel heat shield?
A:
You need to remove the exhaust manifold pipe and the catalytic converter if necessary and remove the exhaust front heat shield nuts, the exhaust front heat shield from the studs, the exhaust heat shield nuts, and the exhaust heat shield from the studs.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the carpet of the front?
A:
You need to remove the front seats, the rear seat, the front center seat, the floor center console, the lower bracket from the I/P to the floor to allow carpet removal, the door sill trim plates, the hinge pillar trim panels from both sides, the garnish molding center pillar trim and the carpet.
By Bob
GM Specialist
29/10/2022Q: What should be noticed when installing the front carpet?
A:
You should use the same thickness and material size as the original installation. To avoid personal injury or vehicle damage when you repair or replace the carpet and always return the carpet to the original location.
By Bob
GM Specialist
29/10/2022Q: What should be noticed when installing the carpet (Avalanche/Escalade EXT)?
A:
You should use the same thickness and material size as the original installation to avoid personal injury or vehicle damage when you repair or replace the carpet, and always return the carpet to the original location.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the carpet of the rear?
A:
You need to remove the rear seat, the rear door sill trim plates, the endgate or the liftgate door sill trim plate, the trim panels for the rear quarter, the bolts that retain the cargo tie-down hooks to the floor, the cargo tie-down hooks and the rear carpet from the vehicle.
By Bob
GM Specialist
29/10/2022Q: What is the drying method?
A:
You should use a wet vacuum to remove the excess moisture if you observe puddles of liquid on the carpet face. blot the face of the carpet with a towel to absorb as much moisture as possible. point a fan at the affected area and air dry the carpet.
By Bob
GM Specialist
29/10/2022Q: What is the recommended bolt torque for the bolts that retain the cargo tie-down hooks to the floor?
A:
The recommended bolt torque is 35 Nm (26 lb-ft).
By Bob
GM Specialist
29/10/2022Q: How to eliminate unwanted odors in Vehicles?
A:
You can use GM Vehicle Care Odor Eliminator to control or eliminate odors in the interior and luggage compartment areas of GM vehicles.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for carpet (Avalanche/Escalade EXT)?
A:
You need to remove the front seats, the rear seats, the front center seat, the floor center console, the lower bracket from the I/P to the floor to allow carpet removal, the door sill trim plates, the hinge pillar trim panels from both sides, and the garnish molding center pillar trim, lower the midgate, and remove the third pillar trim and the carpet from the vehicle.
By Bob
GM Specialist
29/10/2022See more FAQs (7)