Part Description: 2004 Cadillac CTS Handle, Outside
More Info
Vehicle Fitment
2004 Cadillac CTS | Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
FAQ for Exterior Door Handle Repair
Q: What is the proper way to install the rear side door outside handle?
A:
The proper way is to install the door handle rod, the door handle, the outside door handle nuts, the water deflector, and the door trim panel.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the front side door outside handle?
A:
The procedure is to remove the door trim panel, the theft shield screws, the theft shield push-in retainer, the door handle nuts, the door handle, the handle rod, and the lock cylinder rod.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the rear side door outside handle?
A:
The procedure is to remove the door trim panel, the outside door handle nuts, the handle, and the handle rod.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to install the front side door outside handle?
A:
The proper way is to install the handle rod and lock cylinder rod, the door handle, the outside door handle nuts, the theft shield, the theft shield retainer, the water deflector, and the door trim panel.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the front side door check link?
A:
The procedure is to remove the door trim panel, the Door Check link, and the check link.
Q: How to install the door lock switch?
A:
You should snap the Door Lock Switch into the door switch bezel, connect the electrical connector, slide the bezel over the door handle, and then snap the bezel into position by pushing on the lower front corner of the bezel.
Q: What is the proper way to install the rear side door hinge?
A:
The proper way is to install the hinge and the bolts, adjust the door, and then touch up any paint damage to the hinge and the bolts with body color paint.