Part Description: 2002 Buick Rendezvous Hvac Heater Molded Hose
More Info
Vehicle Fitment
2002 Buick Rendezvous | All Trims | 6 Cyl 3.4L
$22.48
FAQ for Heater Hose Repair
Q: What should be done before installing the transmission fluid filler tube?
A:
You will need to connect the inlet heater hose to the inlet pipe.
By Bob
GM Specialist
01/11/2022
Q: What's the recommended torque for the heater inlet pipe nut?
A:
The recommended torque is 7 N.m (62 lb in).
By Bob
GM Specialist
01/11/2022
Q: What should be done before removing the heater inlet pipe?
A:
You will need to drain the engine cooling system.
By Bob
GM Specialist
01/11/2022
Q: What should be noticed when disconnecting the throttle and cruise control cables?
A:
You will need to disconnect the throttle and cruise control cables from the TBI mounting bracket to prevent bending the cable housings.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be noticed when capping off the heater core pipes?
A:
You will need to cap off the Heater Core inlet and outlet pipes to prevent coolant spillage inside the vehicle.
Q: What should be done before removing the radiator outlet hose?
A:
You will need to disconnect the radiator outlet hose from the radiator.
Q: What's the installation procedure for the ambient air temperature gauge sensor?
A:
The installation procedure is to connect the electrical connector to the ambient air temperature gage sensor, install the sensor to the electrical harness clip, install the clip to the hood latch, then close the hood.