Part Description: 2002 Buick Rendezvous Refrigerant Temperature Sensor
More Info
Vehicle Fitment
2002 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
FAQ for Air Temperature Sensor Repair
Q: What's the installation procedure for the ambient air temperature gauge sensor?
A:
The installation procedure is to connect the electrical connector to the ambient air temperature gage sensor, install the sensor to the electrical harness clip, install the clip to the hood latch, then close the hood.
By Bob
GM Specialist
01/11/2022
Q: How do you remove the ambient air temperature gauge sensor?
A:
You can remove the clip from the hood latch, disconnect the electrical connector from the sensor, and remove the ambient air temperature gauge sensor from the electrical harness clip.
By Bob
GM Specialist
01/11/2022
Q: What should be done before removing the ambient air temperature gauge sensor?
A:
You will need to open the hood.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be noticed when capping off the heater core pipes?
A:
You will need to cap off the Heater Core inlet and outlet pipes to prevent coolant spillage inside the vehicle.
Q: What should be done before installing the transmission fluid filler tube?
A:
You will need to connect the inlet Heater Hose to the inlet pipe.
Q: What should be done before removing the radiator outlet hose?
A:
You will need to disconnect the radiator outlet hose from the radiator.