2002 Buick Regal Shock Absorber

You need to install the front cable, connect the cable, install the cable button and the cable button clip to the lever clevis, raise and support the vehicle, remove the slack in the cable, lower the vehicle, install the Parking Brake Cable, position the carpeting, install the lower center pillar trim panel, the left side carpet retainers, and the left side instrument panel insulator, and adjust the parking brake.

You need to raise and suitably support the vehicle, remove the bearing/hub assembly, the front lower control arm ball stud, and the outer tie rod end from the Steering Knuckle, scribe the strut to the knuckle and remove the bolts and nuts attaching the strut, and the knuckle from the vehicle.

You need to disable the SIR system, disconnect the negative battery cable, remove the inflatable restraint steering wheel module, the steering wheel, the left instrument panel insulator, the trim panel below the steering column, the knee bolster, the intermediate Steering Shaft, the shift indicator cable, the casing and the automatic control indicator adjuster or the park lock cable, disconnect the automatic transmission range selector cable, remove the transaxle shift cable casing, the mounting bolts, disconnect the steering column electrical connectors, loosen the bolt, separate the two halves of the steering column electrical connector, and remove the steering column.