Part Description: 2002 Buick Regal Cable Asm-Parking Brake Rear
More Info
Vehicle Fitment
2002 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
FAQ for Parking Brake Cable Repair
Q: What is the removal procedure for the park brake cable in the front?
A:
You need to remove the left side instrument panel insulator, the left side carpet retainers, and the lower center pillar trim panel, fold back the carpeting, remove the parking brake cable, raise and suitably support the vehicle, remove the brake cable, lower the vehicle, and remove the cable button end and the front cable.
By Bob
GM Specialist
02/11/2022
Q: How to install the park brake cable in the rear (Drum Brake)?
A:
You need to install the rear park brake cable, connect the rear park brake cable and the retainer, connect the rear park brake cable, adjust the parking brake, install the rear brake drum and the rear tire and wheel, and lower the vehicle.
By Bob
GM Specialist
02/11/2022
Q: What should be noticed when installing the park lock cable?
A:
You should ensure that the ignition key is in the LOCK position, and should not attempt to insert the cable with the key in any other position.
By Bob
GM Specialist
02/11/2022
Q: What is the removal procedure for the park lock cable?
A:
You need to disconnect the negative battery cable, remove the front floor console and the knee bolster, place the transaxle shift control lever, turn the ignition key to the run position, slip a screwdriver blade into the slot provided, depress the cable latch, pull the cable from the inhibitor, and remove the park/lock cable, the cable retainer and the park/lock cable.
By Bob
GM Specialist
02/11/2022
Q: What is the removal procedure for the park brake cable in the rear (Disc Brake)?
A:
You need to raise and suitably support the vehicle, relieve the park brake cable tension at the equalizer, disconnect the front cable and the retainer, disconnect the park brake cable from the actuator lever, and remove the cable retaining pin and the park brake cable.
By Bob
GM Specialist
02/11/2022
Q: What is the removal procedure for the park brake cable equalizer?
A:
You need to raise and support the vehicle, disconnect the left rear park brake cable and adjustment stud assembly from the equalizer assembly, disconnect the front park brake cable from the right rear cable, remove the equalizer assembly from the front park brake cable, and insert a flat-bladed tool into the equalizer and lightly twist to reposition the equalizer retaining tab.
By Bob
GM Specialist
02/11/2022
Q: How to install the park brake cable equalizer?
A:
You need to install the equalizer assembly to the front park brake cable, connect the front brake cable to the right rear cable, connect the left rear brake cable and adjustment stud assembly to the equalizer assembly, adjust the Park Brake System, and lower the vehicle.
By Bob
GM Specialist
02/11/2022
Q: What is the removal procedure for the park brake cable in the rear (Drum Brake)?
A:
You need to raise and suitably support the vehicle, remove the rear tire and wheel, relieve the park brake cable tension, disconnect the front cable and the retainer, remove the rear brake drum, disconnect the park brake cable, and remove the rear park brake cable.
By Bob
GM Specialist
02/11/2022
Q: How to install the park brake cable in the rear (Disc Brake)?
A:
You need to position the park brake cable into the support bracket and install the cable retaining pin, install the park brake cable to the actuator lever, connect the retainer, connect the rear cable to the front cable, adjust the parking brake, and lower the vehicle.
By Bob
GM Specialist
02/11/2022
Q: How to install the park brake cable in the front?
A:
You need to install the front cable, connect the cable, install the cable button and the cable button clip to the lever clevis, raise and support the vehicle, remove the slack in the cable, lower the vehicle, install the parking brake cable, position the carpeting, install the lower center pillar trim panel, the left side carpet retainers, and the left side instrument panel insulator, and adjust the parking brake.
By Bob
GM Specialist
02/11/2022
See more FAQs (5)
FAQ for Other Repair Info
Q: What is the removal procedure for the brake backing plate?
A:
You need to raise and suitably support the vehicle, remove the tire and wheel assembly, the brake drum, the brake shoes, the universal spring, and the wheel cylinder, disconnect the parking brake cable, and remove the rear wheel hub and the backing plate.