< Back ×
My Vehicle Change Vehicle
2002 Buick Regal
< Back to View All
Wheels & Related Parts
- Department
- Bolt Pattern
- Color
- Diameter
- Finish
- Width
- Brands
- Prices
Dorman® 16 Holes Black 15X6 Steel Wheel for 2002 Buick Regal
PartNumber: 939-179Product Specifications- Notes: 15" Steel Whls
- Backspacing: 144 mm
- Bolt Pattern Diameter: 115 mm
- Bore Diameter: 70.3 mm
- Center Cap Included: No
- Color: Black
- Dimensions: 15 x 6
- Grade Type: Regular
- Load Rating (lbs): 1365 Lbs.
- Lug Hole Diameter: 14.5 mm
- Lug Hole Quantity: 5
- OE Part Number: 9592808
- Offset (mm): 52 mm
- Package Contents: 1 Steel Wheel
- Primary Bolt Pattern: 5 x 115
- Split Type: No
- TPMS Compatible: Yes
- UPC: 019495537366
- Valve Stem Diameter: 11.5 mm
- Wheel Diameter (in): 16.3 In.
- Wheel Finish: Painted
- Wheel Material: Steel
- Width (in): 7.2 In.
- Part Description: 2002 Buick Regal 16 Holes Black 15X6 Steel Wheel
Vehicle Fitment- 2002 Buick Regal | All Trims | All Engines
$64.97
OEM (Genuine) 2002 Buick Regal Wheel
PartNumber: 9592808
Product Specifications- Other Names: Wheel, Wheel Standard, Wheel Steel
- Item Dimensions: 16.3 x 16.8 x 8.2 inches
- Item Weight: 22.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick Regal Wheel
Vehicle Fitment- 2002 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2002 Buick Regal Wheel Rim Assembly-16X6.5 *Chrome
PartNumber: 9592587
Product Specifications- Notes: 16x6.5, Type 2
- Other Names: Wheel Alloy
- Item Dimensions: 21.0 x 20.8 x 11.7 inches
- Item Weight: 20.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick Regal Wheel Rim Assembly-16X6.5 *Chrome
Vehicle Fitment- 2002 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2002 Buick Regal Wheel, Alloy
PartNumber: 9592345
Product Specifications- Notes: 15x6
- Other Names: Wheel Alloy
- Item Dimensions: 21.4 x 21.0 x 11.4 inches
- Item Weight: 16.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick Regal Wheel, Alloy
Vehicle Fitment- 2002 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2002 Buick Regal Wheel Rim Silver
PartNumber: 9593576Product Specifications- Notes: 16x6.5, Type 3, Qd1 Code
- Other Names: Wheel Alloy
- Item Dimensions: 20.9 x 20.9 x 10.8 inches
- Item Weight: 21.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick Regal Wheel Rim Silver
Vehicle Fitment- 2002 Buick Regal | GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2002 Buick Regal Wheel Rim Assembly-15 X 4 Compensator Spare
PartNumber: 9591628
Product Specifications- Other Names: Compact Spare, Spare Wheel, Wheel, Wheel Spare
- Item Dimensions: 17.2 x 17.4 x 5.1 inches
- Item Weight: 18.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick Regal Wheel Rim Assembly-15 X 4 Compensator Spare
Vehicle Fitment- 2002 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
FAQ for Alloy Wheels Repair
Q: What is the service procedure for tire mounting and dismounting?
A:
The procedure is to deflate the tire completely, remove the tire from the wheel, remove any rubber, light rust, or corrosion from the wheel bead seats, apply lubricant to the tire bead and the wheel rim, install the tire to the wheel, inflate the tire to the proper air pressure, and ensure that the locating rings are visible on both sides of the tire to verify that the tire bead is fully seated on the wheel.
By Bob
GM Specialist
01/11/2022Q: What is the procedure for preliminary inspection?
A:
The procedure is to mark the tire with a crayon to note the start and the stop position, rotate each tire and wheel, and inspect the tire for bulges or bent wheels. Replace as necessary.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when mounting the tires?
A:
You should use an approved tire mounting lubricant, and should not use silicon or corrosive base compounds to lubricate the tire bead and the wheel rim. A silicon-based compound can cause the tire to slip on the rim. A corrosive type of compound can cause tire or rim deterioration.
By Bob
GM Specialist
01/11/2022Q: What is the procedure for a tire substitution check?
A:
The procedure is to use a comparable tire to replace each tire, test drive the vehicle, and eliminate the problem when removing the faulty tire if the problem is tire or wheel-related.
By Bob
GM Specialist
01/11/2022Q: What is the inspection procedure for the tire diagnosis-irregular or premature wear?
A:
The procedure is to inspect the front tire wear and the rear tire wear, measure the wheel alignment, and inspect the struts or the shock absorbers if the tire tread exhibits a cupped appearance.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when applying any two-part component paint system?
A:
You should avoid serious personal injury when applying any two-part component paint system, following the specific precautions provided by the paint manufacturer. Failure to follow these precautions may cause lung irritation and allergic respiratory reaction.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the nuts in a cross pattern?
A:
The recommended torque is 140 Nm (100 ft. lbs.).
By Bob
GM Specialist
28/10/2022Q: What is the finish damage evaluation procedure for aluminum wheel refinishing?
A:
The procedure is to inspect the wheels for damage from uncoated wheel balance weights or automatic car wash facilities, inspect the wheels, verify the damage is not deeper than what sanding can remove, and inspect the wheels for cracks and the wheels.
By Bob
GM Specialist
28/10/2022Q: What is the repair procedure for aluminum wheel porosity?
A:
The procedure is to remove the tire and wheel, inflate the tire to the manufactures specified pressure, locate the leak, indicate the leak areas and the orientation of the tire to the wheel, remove the tire from the wheel, scuff the inside of the rim surface, clean the leak area, apply 3 mm thick layer of adhesive/sealant, allow for the adhesive/sealant to dry, align the inscribed mark, install the tire to the wheel, inflate the tire, ensure the leak is sealed, balance the tire and wheel, install the tire and wheel, and lower the vehicle.
By Bob
GM Specialist
28/10/2022Q: What is the removal procedure for the tire and wheel?
A:
You need to raise and support the vehicle, remove the wheel nuts, mark the location of the tire and wheel assembly to the hub assembly, remove the tire and wheel assembly, and clean the wheel nuts, studs, and the wheel and rotor mounting surfaces.
By Bob
GM Specialist
28/10/2022See more FAQs (5)