< Back ×
My Vehicle Change Vehicle
2002 Buick Park Avenue
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
OEM (Genuine) 2002 Buick Park Avenue Fan Switch
PartNumber: 15326386
Product Specifications- Notes: Park Avenue
- Item Dimensions: 2.9 x 1.2 x 0.8 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25036979, 12146312
- Part Description: 2002 Buick Park Avenue Fan Switch
Vehicle Fitment- 2002 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
$27.05 MSRP:$51.06You Save: $24.01 (48%)
OEM (Genuine) 2002 Buick Park Avenue Sensor
PartNumber: 12160244
Product Specifications- Item Dimensions: 2.8 x 2.0 x 0.4 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12110319
- Part Description: 2002 Buick Park Avenue Sensor
Vehicle Fitment- 2002 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
$19.41 MSRP:$36.61You Save: $17.20 (47%)
OEM (Genuine) 2002 Buick Park Avenue In-Car Temperature Sensor
PartNumber: 12160947
Product Specifications- Notes: Inside Air Temp, AT Air Duct; Park Avenue; AT Air Duct
- Item Dimensions: 2.1 x 1.0 x 1.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick Park Avenue In-Car Temperature Sensor
Vehicle Fitment- 2002 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
$7.52 MSRP:$13.62You Save: $6.10 (45%)
OEM (Genuine) 2002 Buick Park Avenue Outside Temperature Sensor
PartNumber: 16169194
Product Specifications- Notes: Park Avenue
- Item Dimensions: 4.2 x 2.2 x 2.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 16145854
- Part Description: 2002 Buick Park Avenue Outside Temperature Sensor
Vehicle Fitment- 2002 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
Original Engine Management® Ambient Air Temperature Sensor for 2002 Buick Park Avenue
PartNumber: ATS7Product Specifications- Attachment Method: Plug In
- Color/Finish: Black
- Connector Gender: Female
- Connector Quantity: 1
- Connector Shape: Oval
- Connector Type: Plug In
- Contents: Sensor
- Hardware Included: No
- Mounting Hardware Included: No
- Mounting Type: Screw-in
- Notes: Complete Assembly
- Terminal Gender: Male
- Terminal Quantity: 2
- Terminal Type: Blade Terminals
- UPC: 841266056208
- Voltage [V]: 12
- Part Description: 2002 Buick Park Avenue Ambient Air Temperature Sensor
Vehicle Fitment- 2002 Buick Park Avenue | All Trims | All Engines
- 2002 Buick Park Avenue | All Trims | 6 Cyl 3.8L
OEM (Genuine) 2002 Buick Park Avenue Sensor Asm, Inside Air Temperature
PartNumber: 16201274
Product Specifications- Notes: Inside Air Temp, AT Cluster Plate; Park Avenue; AT Cluster Plate
- Item Dimensions: 3.1 x 3.1 x 3.0 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick Park Avenue Sensor Asm, Inside Air Temperature
Vehicle Fitment- 2002 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
FAQ for Air Temperature Sensor Repair
Q: How to remove the ambient air temperature sensor?
A:
You need to disconnect the electrical connector from the ambient air temperature sensor and remove the retainer and the ambient air temperature sensor.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the lower left air temperature sensor?
A:
The procedure is to install the lower left air temperature sensor, connect the electrical connector to the lower left air temperature sensor, then install the sound insulator.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the
A:
You should position and insert the IAT sensor into the rear air intake duct, and connect the electrical connector.
By Bob
GM Specialist
01/11/2022Q: How to remove the upper left air temperature sensor?
A:
You need to remove the outer IP trim covers, the left and right IP accessory trim plate, the left IP trim panel, and remove the upper fasteners retaining the lower IP trim, pull the IP trim off the studs, lower the trim out of the way, remove the two screws at the center of the air distributor duct, remove the screws at the outboard side of the air distributor duct, remove the left air temperature sensor from the air distributor duct, then disconnect the air temperature sensor electrical connector.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the ambient air temperature sensor?
A:
The procedure is to install the ambient air temperature sensor with the retainer, then connect the electrical connector to the ambient air temperature sensor.
By Bob
GM Specialist
01/11/2022Q: How to remove the intake air temperature (IAT) sensor?
A:
You need to disconnect the IAT sensor electrical connector, then remove the IAT sensor with a twisting and pulling motion.
By Bob
GM Specialist
01/11/2022Q: How to remove the air temperature sensor-lower left?
A:
You need to remove the sound insulator, disconnect the electrical connector from the lower left air temperature sensor, and remove the lower left air temperature sensor.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the air distributor duct outboard screws?
A:
The recommended torque is 2 N.m (17 lb in).
By Bob
GM Specialist
01/11/2022See more FAQs (3)